Defining Port Settings - 3Com 3CBLSG48 User Manual

Defining Port
Settings
The Port Administration Setup Page allows network managers to
configure port parameters for specific ports.
Monitor users have no access to this page.
To configure Port Settings:
1 Click Port > Administration > Setup. The Port Administration
Setup Page opens.
Figure 44 Port Administration Setup Page
The Port Administration Setup Page contains the following fields:
Port State — Defines the port state. The possible values are:
No Change — Retains the current port status.
Enabled — Enables the port.
Disabled — Disables the port.
Flow Control — Displays the flow control status on the port.
Operates when the port is in full duplex mode. The possible field
values are:
Enabled — Enables flow control on the port.
Disabled — Disables flow control on the port.
No Change — Retains the current flow control status on port.
C C P
HAPTER 6: ONFIGURING
9
ORTS