Configuring How A Port Recognizes And Sends Mstp Packets - 3Com 4500 Configuration Manual

26/50-port
Hide thumbs Also See for 4500:
Table of Contents

Advertisement

To do...
Set the bridge priority for the
current switch
Once you specify a switch as the root bridge or a secondary root bridge by using the stp root
primary or stp root secondary command, the bridge priority of the switch cannot be configured
any more.
During the selection of the root bridge, if multiple switches have the same bridge priority, the one
with the smallest MAC address becomes the root bridge.
Configuration example
# Set the bridge priority of the current switch to 4,096 in MSTI 1.
<Sysname> system-view
[Sysname] stp instance 1 priority 4096

Configuring How a Port Recognizes and Sends MSTP Packets

A port can send/recognize MSTP packets of two formats:
dot1s: 802.1s-compliant standard format
legacy: Compatible format
By default, the packet format recognition mode of a port is auto, namely the port automatically
distinguishes the two MSTP packet formats, and determines the format of packets it will send based on
the recognized format. You can configure the MSTP packet format to be used by a port. After the
configuration, when working in MSTP mode, the port sends and receives only MSTP packets of the
format you have configured to communicate with devices that send packets of the same format.
Configuration procedure
Follow these steps to configure how a port recognizes and sends MSTP packets (in system view):
To do...
Enter system view
Configure how a port
recognizes and sends
MSTP packets
Follow these steps to configure how a port recognizes and sends MSTP packets (in Ethernet port view):
Use the command...
stp [ instance instance-id ]
priority priority
Use the command...
system-view
stp interface
interface-list
compliance { auto | dot1s |
legacy }
1-20
Remarks
Required
The default bridge priority of a
switch is 32,768.
Remarks
Required
By default, a port recognizes and sends
MSTP packets in the automatic mode.
That is, it determines the format of
packets to be sent according to the
format of the packets received.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

4500 pwr

Table of Contents