3Com 3032 Configuration Manual page 32

28 C 2: 3C R
HAPTER OM OUTER
Display the System
Information of the
Router
U I
SER NTERFACE
By default, the system clock is 08:00:00 1 1 1997.
The system clock will reset to the initial number when the configuration is deleted
by using the
delete
3 Reboot the system
Please perform the following commands in all views.
Table 13 Reboot the system
Operation
Reboot the system right now
Reboot the system after a specified time reboot mode interval { hh:mm | time }
Reboot the system at the specified time
Cancel the reboot task
Before rebooting the system, make sure to save the current configuration by using
the command, or some configuration may lost.
save
Execute the following commands in all views.
Table 14 Display the information of the Router
Operation
Displays the current date and clock of the
router
Displays the duration between the startup of
the Router and the execution of the command
Displays the router name
Displays the use information of the CPU
Displays the use information of the router
memory
Displays the basic information of the Router
Displays the software version information of
the Router
command or is deleted at the boot menu.
Command
reboot [ reason reason-string ]
[string ]
reboot mode time hh:mm [ dd/mm/yy ]
[string ]
reboot cancel
Command
display clock
display duration
display systname
display processes cpu
display processes memory { all |
blksize size } [ detail ]
display base-information [ page ]
display version