Configuration Examples - 3Com 3032 Configuration Manual

542 C 38: C
HAPTER ONFIGURING
Displaying and
Debugging AAA and
RADIUS
AAA and RADIUS
Configuration
Examples
Accessing User
Authentication Case 1
AAA RADIUS P
AND ROTOCOL
Configure the time interval at which the
real-time accounting packet is sent to
RADIUS server
Restore default value of the time interval
at which the real-time accounting packet
is sent
By default, the real-time accounting packet is sent to the RADIUS server at an
interval of 0 minutes, indicating that real-time accounting is disabled. The interval
ranges from 0 to 32767 minutes.
Use the and
debugging
Table 617 Display and debug AAA and RADIUS
Operation
Display status of dial-in users
View local user database
Enable RADIUS event debugging
Enable RADIUS packet debugging
Enable RADIUS primitive language
debugging
This section provides examples of using AAA and Radius within a network, with a
suggested procedure for each configuration
The RADIUS server is used for authentication. 129.7.66.66 acts as the first
authentication and accounting server, and 129.7.66.67 as the second
authentication and accounting server, both using default authentication port
number 1812 and default accounting port number 1813.
radius timer
realtime-accounting-scheme minutes
undo radius timer
realtime-accounting
commands in all modes.
display
Command
display aaa user
display user
debugging radius event
debugging radius packet
debugging radius primitive