3Com 3032 Configuration Manual page 57

Table 29 Set the authentication mode of FTP server
Operation
Start AAA server
Disable AAA server
Turn on the accounting selection switch
Turn off the accounting selection switch
Set local authentication for PPP connection aaa authentication-scheme login
2 Add FTP authorized user name and password
Input the following command in system view.
Table 30 Add FTP authorized user name and password
Operation
Add FTP authorized user name and
password
Delete FTP user
For a detailed introduction to the above command, please refer to the chapter
"AAA and RADIUS Configuration" in the Security section of this manual.
Start FTP Server
The FTP server can be started after configuring the authentication and
authorization of the FTP server. The FTP server supports multi-user access
simultaneously. The remote FTP user sends a request to the FTP server, which will
execute a corresponding action and return the execution result to the user.
Enter the following commands in system view.
Table 31 Start FTP server
Operation
Start FTP server
Disable FTP server
Configure Parameters of FTP Service
Configure FTP service parameters according to system running status, so as to
make proper use of system resources.
1 Set the file name on FTP server
Before the file is uploaded or downloaded, the name of the
program/configuration file should be set on the router.
Please enter the following commands in system view.
Table 32 Set the file name on FTP server
Operation
Set the program file name on FTP server
Set the configuration file name on FTP server
Command
aaa-enable
undo aaa-enable
aaa accounting-scheme optional
undo aaa accounting-scheme
optional
default local
Command
Local-user username service-type ftp
password {simple | cipher } password
undo user username
Command
ftp-server enable
undo ftp-server
Command
ftp-server system-name file-name
ftp-server config-name file-name
Configure FTP 53