3Com 3032 Configuration Manual page 80

76 C 5: C
HAPTER ONFIGURING
Configure SNMP
N M
ETWORK ANAGEMENT
Table 56 3Com Router-supported MIB
MIB attribute MIB description
Public MIB MIB II based on TCP/IP network
equipment
RMON MIB
RIP-2 MIB
OSPF MIB
BGP MIB
PPP MIB
X.25 MIB
LAPB MIB
PPP
FrameRelay MIB
SNMP
Private MIB IP MIB
ICMP MIB
QoS MIB
NDEC MIB
DLSw MIB
MIB of terminal access servers
MIB of RMON extension alarms
3Com Router MIB
3Com Module MIB
SNMP configuration includes:
Configure the network management agent on a router
Configure the information of router administrator
Configure the SNMP version
Configure the trap
Adjust the maximum size of SNMP packets
1 Configure network management agent on a router
Perform the following configurations in system view.
Table 57 Configure network management agent on a router
Operation
Enable SNMP service
Disable SNMP service
Set an engine ID for the equipment
Set the engine ID of equipment to the default
value
By default, the system disables SNMP service.
Engine ID is the unique ID of individual routers on the overall network. It is a string
of 5 to 32 bytes in hexadecimal format. By default, the SNMP engine ID is
Reference
RFC1213
RFC1757
RFC1389
RFC1253
RFC1657
RFC1471
RFC1382
RFC1381
RFC1471, RFC1472, RFC1473,
RFC1661, RFC1332, and RFC1334
RFC1315 and RFC2115
RFC1907, RFC2271, RFC2272,
RFC2273, RFC2273, RFC2274 and
RFC2275
Command
snmp--agent
undo snmp-agent
snmp-agent local-engineid
engineid
undo snmp-agent local-engineid