3Com 3032 Configuration Manual page 65

Configuration Examples
of Dumb Terminal
Service
Configure the synchronous/asynchronous serial work in
asynchronous mode
Configure the serial interface of the router to be in flow
mode
Forbid modem to dial in or dial out
By default, no dumb terminal service is configured.
2 Configure
auto-execute command
If the
auto-execute command
interface, when you press Enter twice on the external terminal connected to the
interface or log onto the router in modem dial-up mode and press Enter twice, the
router will automatically execute the operation preset by the
command.
command
If the router is configured with the
not be allowed to log into the configuration interface of the router. If the
command cannot be executed, you will return to the interface with the prompt
Press ENTER to get started
executed.
Please perform the following configurations in asynchronous serial interface view.
Table 44 Configure
auto-execute command
Operation
Configure the auto-execute command
command on the asynchronous serial interface
Remove this command
By default, the
auto-execute command
Configure Dumb Terminal
The configuration procedure of the dumb terminal on sync/async serial 0 ports
is as follows:
[Router-Serial0] physical-mode async
[Router-Serial0] undo modem
[Router-Serial0] async mode flow
The configuration procedure of the dumb terminal on 8/16 async serial 0 port
is as follows:
[Router-Async0] undo modem
[Router-Async0] async mode flow
The configuration procedure of the dumb terminal on AUX port is as follows:
[Router-Aux0] undo modem
After the above operation,
connected to this async interface, press Enter twice to enter the router
configuration interface. During the configuration, you can click logout to exit the
command line interface and can also click Enter twice to return.
Configure Auto-execute command
The user can use the Telnet command specified by the
log on the remote SCO UNIX workstation after establishing the connection with
the Router via the dumb terminal.
command
command is configured on the asynchronous serial
auto-execute command
, and after you press Enter, the command will be
command
Command
auto-execute command command
undo auto-execute command
command
command is not configured.
Press ENTER to get started
Dumb Terminal Service
physical-mode async
async mode flow
undo modem
auto-execute
command, you will
displays on the terminal
command to
auto-execute
61