Dtmf/T-Call - Icom ID-52A PLUS Advanced Manual

12
SET MODE
SPEECH
SPEECH Speed
[MENU] > SET > SPEECH > SPEECH Speed
Sets the speech speed to Fast or Slow�
SPEECH Level
[MENU] > SET > SPEECH > SPEECH Level
Sets the Voice Synthesizer audio output level to
between 0 (OFF), 1 (minimum) and 9 (maximum)�
L The voice synthesizer audio output level is linked with the
[VOL] setting from the minimum audio volume up to this
set level�

DTMF/T-CALL

(Default: Fast) You can set the DTMF tone code and DTMF Memory
channel for DTMF tone operation�
See page 15-5 for details�
DTMF Memory
[MENU] > SET > DTMF/T-CALL > DTMF Memory
(Default: 7)
Displays a list of the DTMF Memory channels�
• T-CALL: 1750 Hz tone burst signal
• d0 ~ d#: DTMF memory channel list
DTMF Speed
[MENU] > SET > DTMF/T-CALL > DTMF Speed
Selects the DTMF transmit speed�
• 100ms: Transmits the DTMF codes at about 100
• 200ms: Transmits the DTMF codes at about 200
• 300ms: Transmits the DTMF codes at about 300
• 500ms: Transmits the DTMF codes at about 500
12-14
milliseconds per code
(5 characters per second)�
milliseconds per code
(2�5 characters per second)�
milliseconds per code
(1�6 characters per second)�
milliseconds per code
(1 character per second)�
(Default: d0)
(Default: 100ms)