Dselecting The Fm Radio Mode; Dselecting The Group In The Memory Mode - Icom ID-52A PLUS Advanced Manual

4
FM RADIO OPERATION
Basic operation

DSelecting the FM Radio mode

1� When the FM RADIO window is displayed,
push [MR] to select between the Tuning and the
Memory modes�
2� Rotate [DIAL] to select a frequency or a memory
channel�
• Tuning mode
The FM Radio Tuning mode is used to set the desired
FM Radio frequency�
When the Tuning mode is selected, "
displayed�
To save the selected frequency, hold down [MR] for 1
second�
• Enters it into the lowest memory channel of the selected
group�
Tuning mode
• Memory mode
The FM Radio Memory mode is very useful to quickly
select often-used frequency settings�
When the Memory mode is selected, "
selected memory channel group (A ~ Z) and number
are displayed�
Memory mode
TIP: Push [QUICK], and select "VFO" to select the
Tuning mode, or select "MR" to select the Memory
mode�
DSelecting the group in the Memory
mode
Up to 50 FM Radio Memory channels can be assigned
to each group for easy memory management�
If you change the group, other area channels can be
selected�
1� Push [MR] to select the Memory mode�
" is
• "
2� Push [QUICK]�
3� Select "Group Select�"
4� Select the desired group�
" and the
• Returns to the standby screen, and the memory
5� Rotate [DIAL] to select a memory channel�
4-3
" and the selected memory channel number is
displayed�
channel in the selected group is displayed�