Icom ID-52A PLUS Advanced Manual page 35

4
FM RADIO OPERATION
FM Radio memory
D Add an FM Radio memory
Step 2. Entering an FM Radio Memory name
1� Select "NAME�"
2� Enter a name�
L See page iii on how to enter characters�
3� After entering, push [ENT]�
TIP: To change the FM Radio memory group, select
"GROUP," then select the desired group�
Step 3. Entering a frequency
1� Select "FREQUENCY�"
2� Rotate [DIAL] to enter the frequency�
L Push D-pad() to move the cursor�
L The usable frequency range differs, depending on the
transceiver's version�
3� After entering, push [ENT]�
Step 4. Selecting the skip setting
1� Select "SKIP�"
2� Select "OFF" or "SKIP�"
• OFF: You can select the memory in the Memory mode�
• SKIP: The memory is not displayed in the Memory
mode�
Step 5. Saving the FM Radio Memory
1� Select "<<Add Write>>�"
2� Select "YES�"
• The entered contents are saved in the FM Radio
memory, and the display returns to the selected
group screen�
TIP: How to cancel the entered data:
1� Push [CLR]�
2� Select "YES�"
• Cancels the entry, and returns to the selected group
screen�
4-7