Icom ID-52A PLUS Advanced Manual page 212

12
SET MODE
Bluetooth Set
VOX
[MENU] > SET > Bluetooth Set > Headset Set >
VOX > VOX
Turns the Voice Operated Transmission (VOX)
function ON or OFF�
The VOX function starts transmission without pushing
[PTT] when you speak into the microphone, and
then, automatically returns to receive when you stop
speaking�
L To use the VOX function, the optional Bluetooth headset
is required�
• OFF: Turns OFF the function�
• ON: Starts transmission without pushing [PTT]
when you speak into the microphone� Then
automatically returns to receive when you
stop speaking�
VOX Level
[MENU] > SET > Bluetooth Set > Headset Set >
VOX > VOX Level
Sets the VOX gain level to between 1 and 10, or OFF�
Higher values make the VOX function more sensitive
to your voice�
• OFF: Turns OFF the VOX function�
• 1 ~ 10: 1 (The minimum sensitivity)
10 (The maximum sensitivity)
VOX Delay
[MENU] > SET > Bluetooth Set > Headset Set >
VOX > VOX Delay
Sets the VOX Delay time to 0�5, 1�0, 1�5, 2�0, 2�5 or
3�0 seconds� The VOX Delay is the amount of time the
transmitter stays ON after you stop speaking, before
the VOX switches to receive�
VOX Time-Out Timer
[MENU] > SET > Bluetooth Set > Headset Set >
VOX > VOX Time-Out Timer
Sets the VOX Time-Out Timer to prevent an accidental
prolonged transmission� To disable the function, set to
"OFF�"
• OFF: Turns OFF the function�
• 1, 2, 3, 4, 5, 10, or 15min:
If a continuous transmission exceeds the set
period of time, the transmission is cut off�
(Default: OFF)
(Default: 5)
(Default: 0�5sec)
(Default: 3min)
12-33
Power Save
[MENU] > SET > Bluetooth Set > Headset Set >
Icom Headset > Power Save
Selects whether or not to operate with the Power Save
mode while the optional VS-3 headset is connected�
L When a headset (user supplied) or a data device is
connected, the Power Save mode is automatically turned
OFF, regardless of this setting�
• OFF: Turns OFF the function�
• ON: The Power Save mode is enabled when no
communication or operation is performed for
120 seconds�
One-Touch PTT
[MENU] > SET > Bluetooth Set > Headset Set >
Icom Headset > One-Touch PTT
Sets the One-Touch PTT function when the optional
VS-3 headset is connected�
This function enables you to transmit without
continuously holding down [PTT]�
L When a headset (user supplied) is connected, this
function is automatically turned ON, regardless of this
setting�
• OFF: Transmits while holding down [PTT]�
• ON: Pushing [PTT] toggles between transmit and
receive�
PTT Beep
[MENU] > SET > Bluetooth Set > Headset Set >
Icom Headset > PTT Beep
Sets the beep sound when you push [PTT] on the
optional VS-3 headset�
• OFF: No beep sounds�
• ON: A beep sounds�
(Default: OFF)
(Default: OFF)
(Default: OFF)