Icom ID-52A PLUS Advanced Manual page 108

6
GPS OPERATION (ADVANCED)
GPS Memory
D Adding a GPS Memory (Continued)
3. Entering the GPS Memory date
1� Select "DATE�"
2� Push D-pad() to move the cursor�
3� Rotate [DIAL] to enter the date�
L Set between 2000/01/02 and 2099/12/30�
4� Repeat steps 2 and 3 to enter the date�
5� After entering, push [ENT]�
4. Entering the GPS Memory time
1� Select "TIME�"
2� Push D-pad() to move the cursor�
3� Rotate [DIAL] to enter the date�
L Set between 00:00:00 and 23:59:59�
4� Repeat steps 2 and 3 to enter the time�
5� After entering, push [ENT]�
5. Entering the GPS Memory latitude
1� Select "LATITUDE�"
2� Push D-pad() to move the cursor�
3� Rotate [DIAL] to enter the latitude�
L Information
• Set between 0°00.00' and 90°00.00'.
• You can change the unit�
( [MENU] > SET > Display > Display Unit >
Latitude/Longitude)
• To enter a north latitude, select "N," and to enter a
south latitude, select "S�"
4� Repeat steps 2 and 3 to enter the latitude�
5� After entering, push [ENT]�
6. Entering the GPS Memory longitude
1� Select "LONGITUDE�"
2� Push D-pad() to move the cursor�
3� Rotate [DIAL] to enter the longitude�
L Information
• Set between 0°00.00' and 180°00.00'.
• You can change the unit�
( [MENU] > SET > Display > Display Unit >
Latitude/Longitude)
• To enter an east longitude, select "E," and to enter a
west longitude, select "W�"
4� Repeat steps 2 and 3 to enter the longitude�
5� After entering, push [ENT]�
6-23