Loading The Saved Files On The Microsd Card - Icom ID-52A PLUS Advanced Manual

2
USING A microSD CARD

Loading the saved files on the microSD card

The saved Memory channels, settings on the MENU
screen, and Repeater List can be copied to the
transceiver�
This makes it easy to copy Memory channels or the
Repeater List, to another ID-52A/E PLUS and operate
with the same data�
NOTE: Saving the current data is recommended
before loading other data into the transceiver�
Example: Loading all the data in the
"Set20240531_01" file
[MENU] > SET > SD Card > Load Setting
1� Push [MENU]�
2� Select "SD Card" in the "SET" menu�
3� Select "Load Setting�"
4� Select a data file to load into the transceiver�
5� Select the loading content�
• ALL:
Loads all Memory channels, settings on the
MENU screen, and the Repeater List into the
transceiver�
• Except My Station:
Loads all Memory channels, setting on the
MENU screen except MY station, and the
Repeater List into the transceiver�
• Repeater List Only:
Loads only the Repeater List into the transceiver�
6� Select "YES" or "NO�"
• YES:
The skip settings of the Repeater List are
retained�
• NO:
The skip settings of the Repeater List are
cleared�
7� Select "YES�"
• Starts checking and loading the data file�
• After loading, "COMPLETED!" is displayed�
8� Restart the transceiver to operate with the new
setting�
2-4