Icom ID-52A PLUS Advanced Manual page 262

17
OPTIONS
Connecting an iOS device to the transceiver through Bluetooth
DConnection
This section describes how to connect to a paired
transceiver from an iOS device
Before connecting, pair the transceiver with the iOS
device (p 17-7)
L When using the ST-4001I application, the transceiver
and the iOS device are automatically connected while
transferring a picture
Step 1. Starting the RS-MS1I
Touch the RS-MS1I to start
L See page 17-6 for details on downloading the RS-MS1I
Step 2. Connecting to the transceiver
1 Touch "Other"
2 Touch "Bluetooth Connection"
3 Touch the displayed transceiver Bluetooth unit's
name to connect
• Starts to connect
L When your call sign has not been entered in the
transceiver, enter it before you connect
L If the connection has been made, the transceiver
MMM
displays " Connected," and the Bluetooth icon
is displayed
L On the PAIRING/CONNECT screen, "
Device name
Displayed while connecting
(iOS device)
(iOS device)
Displayed
" is displayed
®
TIP: To connect to the iOS device from the
transceiver
When the RS-MS1I is started on the iOS device, you
can connect to the device from the transceiver
[MENU] > SET > Bluetooth Set > Pairing/Connect
1 Push [MENU]
2 Select "Bluetooth Set" in the SET menu
3 Select "Pairing/Connect."
4 Select the iOS device name displayed in the
pairing list
5 Select "YES"
• Displays " MMM
MMM
(" " is the Bluetooth name of the iOS device)
L On the PAIRING/CONNECT screen, "
displayed on the data device icon
17-10
Connecting"
" is