Icom ID-52A PLUS Advanced Manual page 75

5
D-STAR OPERATION (ADVANCED)
Entering new information into the repeater list
D Entering new information into the repeater list
Step 12. Setting the FM mode
L When Step 2. Selecting the communication type
is set to "DV Repeater" or "DV Simplex," this item is
not displayed�
1� Select "MODE�"
2� Select "FM" or "FM-N�"
Step 13. Setting the tone
L When Step 2. Selecting the communication type
is set to "DV Repeater" or "DV Simplex," this item is
not displayed�
1� Select "TONE�"
2� Select an option�
• OFF: Turn OFF the Tone function�
• TONE: Select when the repeater requires an access
tone�
• TSQL: Select when you want to use the tone
squelch in simplex operation�
Step 14. Selecting the repeater tone frequency
L When Step 2. Selecting the communication type
is set to "DV Repeater" or "DV Simplex," this item is
not displayed�
L This setting is required when Step 13. Setting the
tone is set to "TONE" or "TSQL�"
1� Select "REPEATER TONE�"
2� Rotate [DIAL] to select the repeater tone
frequency, and then push [ENT]�
Step 15. Selecting the position data accuracy level
L When the Near Repeater Search function is not
used, or the distance between your location and
a repeater is not needed, select "OFF," and go to
Step 18. Setting the UTC offset.
1� Select "POSITION�"
2� Select the position data accuracy level�
• None:
• Approximate: Select when the entered position data
• Exact:
Step 16. Entering the latitude
L This item is displayed only when Step 15.
Selecting the position data accuracy level is set
to "Approximate" or "Exact�"
1� Select "LATITUDE�"
2� Rotate [DIAL] to enter the latitude�
L Push D-pad() to move the cursor�
L To enter a north latitude, select "N," and to enter a
south latitude, select "S�"
3� After entering, push [ENT]�
5-34
Select when the repeater has no
position data�
is approximate�
Select when the entered position data
is exactly correct�