Icom ID-52A PLUS Advanced Manual page 206

12
SET MODE
Display
RX Picture Indicator
[MENU] > SET > Display > RX Picture Indicator
Selects whether or not to display the RX Picture
Indicator when a picture is included in the received
signal�
• OFF: No indicator is displayed, even if a picture is
included in the received signal�
• ON: The indicator is displayed when a picture is
included in the received signal�
L When "RX Call Sign" is set to "OFF," the indicator is not
displayed, even if a picture is included in the received
signal�
DV RX Backlight
[MENU] > SET > Display > DV RX Backlight
Turns the DV RX Backlight function ON or OFF�
In the DV mode, this function turns ON the backlight
while displaying the calling station's call sign or a
received message�
• OFF: Turns OFF the function�
• ON: The backlight automatically lights when
displaying the calling station's call sign or a
received message� The backlight stays ON
while the call sign or message is scrolling�
NOTE: When you set this item to "ON," set
"Backlight" to "Auto" or "Auto (DC IN:ON)�"
TX Call Sign
[MENU] > SET > Display > TX Call Sign
Selects whether or not to display the My or Your call
sign while transmitting�
• OFF: Turns OFF the function�
• Your Call Sign: Displays and scrolls the call sign of
the target station�
• My Call Sign: Displays and scrolls your own call sign�
L When "Your Call Sign" is selected, and if the call sign and
name of the caller station is entered in your memory, the
name is displayed after the call sign, in any DV mode
except when using the DR function�
Scroll Speed
[MENU] > SET > Display > Scroll Speed
Sets the scrolling speed of the message, call sign, or
other text, that are displayed on the screen to "Slow"
or "Fast�"
(Default: ON)
(Default: ON)
(Default: Your Call Sign)
(Default: Fast)
Opening Message
[MENU] > SET > Display > Opening Message
Selects whether or not to display the opening
message at power ON�
When you set this item to "ON," Icom logo, MY call
sign, and the model are displayed�
Voltage (Power ON)
[MENU] > SET > Display > Voltage (Power ON)
Selects whether or not to display the voltage of the
battery or external DC power source at power ON�
NOTE: When the external DC power source voltage
is above 15�6V, "HI Voltage" is displayed� In that
case, immediately disconnect the DC power source�
Single Band Display
[MENU] > SET > Display > Single Band Display
Selects to display the date or GPS information at the
bottom of the Single band display�
• Date:
• GPS Information: Displays the GPS information�
Latitude/Longitude
[MENU] > SET > Display > Display Unit >
Latitude/Longitude
Selects the format to display the position data�
Altitude/Distance
[MENU] > SET > Display > Display Unit >
Altitude/Distance
Selects the format to display the distance and elevation�
L The default value may differ, depending on the
transceiver version�
Speed
[MENU] > SET > Display > Display Unit > Speed
Selects the format to display the speed�
L The default value may differ, depending on the
transceiver version�
Temperature
[MENU] > SET > Display > Display Unit > Temperature
Selects the format to display the temperature�
L The default value may differ, depending on the
transceiver version�
12-27
(Default: ON)
(Default: ON)
(Default: Date)
Displays the date�
(Default: dddº mm.mm')
(Default: ft/mi)
(Default: mph)
(Default: ºF)