Are Your Settings Correct - Icom ID-52A PLUS Advanced Manual

5
D-STAR OPERATION (ADVANCED)

Are your settings correct?

If you make a Local Area call with a gateway repeater
still selected in "TO," the destination repeater will be
busy while you transmit�
The stations that want to use the repeater as their
access repeater cannot access it, as shown below�
BE SURE to set CQCQCQ in "TO" on the DR screen
when you intend to make a Local Area call or finish a
Gateway call�
Example: JA3YUA wants to make a Local Area call�
CQ D-STAR Hirano, this is JA3YUA CQ D-STAR Hirano, this is JA3YUA
through JP3YHH port A for a local call... through JP3YHH port A for a local call...
Caller
(JA3YUA)
JA3YUA's setting
The destination ("TO") setting is incorrect�
Correct setting
To make a Local Area call, set the destination ("TO")
to "CQCQCQ�" See page 5-9 for details�
Hirano area
INTERNET INTERNET
Called
NOTE: With this setting, you can make a Local Area
call, but the destination Repeater, selected in "TO,"
is also busy while you transmit�
The stations that want to use the repeater as their
Access Repeater cannot access it�
5-44
His setting is wrong! His setting is wrong!
I can't access the repeater! I can't access the repeater!
Hamacho area