Kodak 7010 User Manual

Hide thumbs Also See for 7010:

Quick reference manual (77 pages)

Supplement to the owner's manual (7 pages)

Supplemental manual (8 pages)

Table Of Contents

Table of Contents

Quick Links

Download this manual

KODAK 7015 Photo Printer

7010 Photo Printer

User's Guide

Table of Contents

Need help?

Do you have a question about the 7010 and is the answer not in the manual?

Questions and answers

Summary of Contents for Kodak 7010

Page 1 KODAK 7015 Photo Printer 7010 Photo Printer User’s Guide...
Page 3: Table Of Contents
Table of Contents 1 Setting Up the Printer Package Contents............................1-1 Preparing the Printer for Use ........................1-2 Connecting the Cables ...........................1-3 Connecting the Power Cable........................1-3 Connecting the USB Cable........................1-3 Turning On the Printer ..........................1-4 Handling and Storing the Paper and Ribbons..................1-4 Loading the Ribbons............................
Page 4 Table of Contents Appendix A: Additional Information System Requirements............................A-1 Printer Specifications .............................A-1 Printer Supplies ..............................A-2 Paper and Ribbon.............................A-2 Thermal Printer Cleaning Kit ........................A-2 Packing and Transporting the Printer.......................A-3 Getting Help ..............................A-3 Appendix B: Safety and Regulatory Information Important Safety Information ........................B-1 Safety Labels ..............................B-2 Regulatory and Safety Compliance ......................B-3 Safety ................................B-3...
Page 5: Setting Up The Printer Package Contents
Setting Up the Printer Setting Up the Printer Package Contents The KODAK 7010 Photo Printer is packaged with the following items: 1. Printer 2. Trim tray (not installed) 3. Paper flange with gear (green) 4. Paper flange without gear (gray)
Page 6: Preparing The Printer For Use
Setting Up the Printer Preparing the Printer for Use The printer weighs approximately 63 lbs (29 kg) and is IMPORTANT: heavier at the front than at the back. Use caution when lifting or moving the printer. NOTE: Keep the carton and packaging in case you ever need to transport the printer.
Page 7: Connecting The Cables
Setting Up the Printer Connecting the Cables Connecting the Power If you received more than one power cable with your printer, make Cable sure to use the correct power cable for your country. 1. Check that the power switch is turned off ( ). CAUTION: The power outlet must be grounded.
Page 8: Turning On The Printer
• Store the paper and ribbons away from direct sunlight. Loading the Ribbons Loading the Photo Ribbon Make sure you have a KODAK 7000 Print Kit 6R (sold separately) available. This kit contains the correct photo ribbon for your printer (see “Printer Supplies”...
Page 9 Setting Up the Printer 2. Carefully open the top cover. The top cover does not open beyond a 90° angle. IMPORTANT: CAUTION: The thermal head becomes extremely hot during normal operation. Do not touch it. There are sharp cutter blades inside the printer. Follow instructions carefully to avoid touching any areas that may be hazardous.
Page 10 Setting Up the Printer 8. Remove the label. 9. Push the right side of the take-up spool onto the rear spool holder on the right. 10. Insert the left side of the take-up spool onto the spool holder on the left. 11.
Page 11: Loading The Backprinter Ribbon Cartridge
Setting Up the Printer Loading the Backprinter Make sure you have a Backprinter Media Kit for KODAK 701X Ribbon Cartridge Photo Printers (sold separately) available. This kit contains the correct ribbon cartridge for your printer (see “Printer Supplies” on page A-2).
Page 12 Setting Up the Printer 3. Pull the carriage link downward and outward to move the carriage to the loading position.
Page 13 Setting Up the Printer 4. Carefully remove the installed cartridge: a. Grasp the cartridge by the edges, near the bottom. b. Remove the cartridge, lifting the bottom end first. Pull the cartridge the rest of the way out, making sure the ribbon clears the print head.
Page 14 Setting Up the Printer 6. Carefully install the new cartridge: a. Insert the cartridge into the carriage as shown, ribbon end first. Slide the ribbon between the guide plate and the print head. If necessary, use the tension knob on the cartridge to maintain tension on the ribbon.
Page 15 Setting Up the Printer 7. Press the carriage inward then upward back into the printer position. The carriage locks into place when it is in the correct position. Allow the carriage to follow the guide slots along the IMPORTANT: carriage plate. Do not force. 1-11...
Page 16 Setting Up the Printer 8. Close the backprinter cover, making sure it is seated against the magnets. (If the cover is not fully closed, the trim tray cannot be inserted or removed, and the backprinter will not print.) 9. Replace the trim tray. NOTE: If space is limited, the trim tray can be installed by tilting then inserting it into the printer.
Page 17: Loading The Paper
Setting Up the Printer Loading the Paper Make sure you have a KODAK 7000 Print Kit 6R (sold separately) available. This kit contains the correct paper for your printer (see “Printer Supplies” on page A-2). 1. Make sure the printer power is on ( | ).
Page 18 Setting Up the Printer 5. Carefully lower the paper roll into the slots. Match the geared flange (green) with the geared slot (green) on the printer. Label 6. Remove the label from the paper roll. NOTE: Verify that the paper unrolls from the top of the roll. Slot (green) 7.
Page 19: Making A Test Print
Setting Up the Printer 9. Empty and replace the trim tray. NOTE: To keep your prints dust-free and to prevent paper jams, empty the trim tray each time you change the paper. Making a Test Print Make a test print to check that the printer is installed and set up correctly.
Page 21: Operating The Printer
Operating the Printer Making Prints You make prints using photo printing software applications. For application-specific printing information, see the user’s guide or online Help for the software application. Handling and Storing Prints For best results: • Make sure hands are clean and free of food, oil, and grease. •...
Page 22: Operator Panel Buttons
Operating the Printer Operator Panel Buttons Button Menu To enter Setup Mode. Menu scroll To scroll through printer settings. Setting To scroll forward or backward through options scroll setting options. Enter To initiate an action or accept a change. Paper To advance paper.
Page 23: Printer Settings
Printer settings are displayed here Photo Printer 7010 1. Press Menu to enter Setup Mode. 2. Press Menu repeatedly to scroll through the printer settings. 3. Press + / - to scroll through selections. 4. Press Enter to initiate an action or accept a change.
Page 24 Operating the Printer Display Description Wait Time The length of time (from 0 to 100 seconds) the printer waits after receiving a 4R print command before it starts printing. Depending on the setting, the wait time allows the printer to receive a second 4R print that prints at the same time as the first 4R print.
Page 25: Maintaining The Printer
Maintaining the Printer To ensure good printer performance and high-quality prints, make sure the KODAK 7010 Photo Printer and its environment are clean and dust free. Performing Routine Maintenance To maintain good print quality, clean the exterior of the printer and...
Page 26 Maintaining the Printer CAUTION: The thermal print head becomes extremely hot during normal operation. Wait approximately five minutes after you open the top cover before cleaning it. Fingerprints can damage the thermal head. Never touch it with your bare hands or fingers. 3.
Page 27: Cleaning The Platen Roller
Maintaining the Printer Cleaning the Platen Roller 1. Make sure the power switch is turned off ( ). 2. Carefully open the top cover. CAUTION: The thermal head becomes extremely hot during normal operation. Do not touch it. There are sharp cutter blades inside the printer. Follow instructions carefully to avoid touching any areas that may be hazardous.
Page 28: Cleaning The Cleaning Rollers
Maintaining the Printer Cleaning the Cleaning It is essential to keep the cleaning rollers clean to prevent dirt Rollers from transferring back onto the prints and to keep the printer operating correctly. 1. Make sure the power switch is turned off ( ). 2.
Page 29 Maintaining the Printer 6. Repeat steps 1-3 to remove, clean and reinstall the front cleaning roller. CAUTION: The thermal head becomes extremely hot during normal operation. Do not touch it. There are sharp cutter blades inside the printer. Follow instructions carefully to avoid touching any areas that may be hazardous.
Page 31: Troubleshooting
Troubleshooting Problem Description or Cause Possible Solution Paper jam; error light is on, Paper is jammed in the Clear the paper jam (see page 4-3). printer does not operate printer Prints have vertical streaks Thermal print head is dirty. Clean the thermal print head (see page 3-1).
Page 32: Resolving Operator Panel Error Messages
Troubleshooting Resolving Operator Panel Error Messages 7010 Photo Printer Refer to the following table to resolve errors reported on the operator panel. If the error persists, contact Service and Support. Error Message Description or Cause Possible Solution Paper Empty The paper is empty or is not installed Load (or reload) the paper (see correctly.
Page 33: Clearing A Paper Jam
Troubleshooting Clearing a Paper Jam 1. Press the Paper Rewind button twice. 2. Open the paper door. 3. If the paper is not fully rewound, manually rewind the paper onto the roll. CAUTION: To prevent damage to the printer, do not pull abruptly on the paper.
Page 34 Troubleshooting 2. Look inside the front compartment and carefully remove any paper or obstructions. 3. Close the front cover. If the Paper Jam message is still displayed on the operator panel: 1. Turn off the printer. A161_4510AA 2. Carefully open the top cover. CAUTION: The thermal head becomes extremely hot during normal operation.
Page 35: Recovering From A Power Interruption
Troubleshooting 4. Look inside the ribbon compartment and carefully remove any pieces of paper. 5. Load the ribbon (see page 1-4). 6. Close the top cover. 7. Turn on the printer. If the Paper Jam message is still displayed on the operator panel, contact Service and Support.
Page 37: Appendix A: Additional Information
Appendix A: Additional Information System Requirements • Computer with MICROSOFT WINDOWS XP, WINDOWS 2003 Server, WINDOWS VISTA Operating System • Minimum 1.0 GHz Celeron Microprocessor • Minimum memory requirement is determined by your operating system • Minimum 2 GB of available hard disk space •...
Page 38: Printer Supplies
86° F (30° C) or lower specifications 60% relative humidity or lower Thermal Printer Cleaning Use the KODAK Thermal Printer Cleaning Kit when performing routine maintenance on the printer (see page 3-1). One Thermal Printer Cleaning Kit is included with your printer.
Page 39: Packing And Transporting The Printer
Additional Information Packing and Transporting the Printer CAUTION: Shipping the printer with paper and ribbon installed can cause damage to the printer. 1. Remove the paper and ribbon from the printer. 2. Reinstall the packing materials (see page 1-2). 3. Repack the printer in the original packing box. See the packing/unpacking instructions included with the box.
Page 41: Appendix B: Safety And Regulatory Information
Appendix B: Safety and Regulatory Information Important Safety Information CAUTION: Use of controls or adjustments or performance of procedures other than those specified in this manual may result in injury and/or damage to the printer. • The power outlet should be easily accessible and installed near the printer.
Page 42: Safety Labels
Safety and Regulatory Information Safety Labels Please observe the important safety warnings that are posted on the printer. P/N 2J5451 1641132182 CAUTION HOT SURFACE To prevent burns, avoid touching the thermal print head. P/N 2J5452 1641132183 CAUTION SHARP OBJECTS The metal edges of the printer may be sharp. P/N 2J5439 1641132233 CAUTION SHARP CUTTER BLADE...
Page 43: Regulatory And Safety Compliance
Safety and Regulatory Information Regulatory and Safety Compliance Safety Complies with UL 60950-1: 2006 CAN/CSA C22.2 No. 60950-1-03 EN 60950-1: 2001 IEC 60950-1: 2001 Tested for Norwegian IT Power systems 240V phase to phase Electromagnetic NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 Compatibility (EMC) of the FCC rules.
Page 44 Safety and Regulatory Information CAUTION: This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. “Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.”...
Page 45: Noise Emission
Contact Service and Support or refer www.kodak.com/go/recycle for additional information on the collection and recovery programs available for this product.
Page 46: China Rohs
This value is assigned based on normal use of the product as described in the operating instructions. Table of hazardous substance's name and concentration Model Name: KODAK 7010 Photo Printer...

Kodak 7010 User Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Kodak 7010

Summary of Contents for Kodak 7010

Table of Contents