Using The Visual Calibration Mode For The Kodak D4000 Duplex Photo Printer - Kodak D4000 User Manual

Using the Visual
Calibration Mode for the
KODAK D4000 Duplex
Photo Printer
November 2011
8. To verify the calibration results:
• Select Current printer settings as a starting calibration
setting.
• Click Start Printer Calibration to make another test print.
9. Do Steps 3-8 until patch 25 is the most neutral gray.
1. At the "KODAK Photo Printer Calibration Application" dialog
box, select:
• your printer model.
• the printer name and serial number.
• the starting calibration setting
– Current printer settings—use the current printer
settings as the starting point.
– Default printer settings—use the default printer settings
as the starting point.
• Visual for the Calibration Method.
2. Click Start Printer Calibration.
The printer prints two calibration targets—one with the letter
A, and one with the letter B appearing above Patch 1.
3. Determine the most neutral gray patch on the Side A
calibration target.
4. Click the arrows to enter the patch number for Side A that
corresponds with the most neutral patch on the calibration
target.
Using the Calibration Application
3-3