Calibrating The Printer; Installing The Calibration Software; Using The Calibration Utility - Kodak 6800 User Manual

3

Calibrating the Printer

Installing the Calibration Software

Using the Calibration Utility

The KODAK Calibration Utility (calibration utility) allows the KODAK Photo
Printer to produce the best possible color response. Printer calibration
adjusts the response of the printer so that a specific data input value yields a
specific color density output. When a printer is properly calibrated, it
generates the correct density for each given data value.
Your KODAK Photo Printer is shipped with default factory calibration values.
You should be able to set up your printer and begin printing right away
without having to first calibrate the printer. However, if you are dissatisfied
with your prints, follow the steps in this chapter to calibrate your printer.
Insert the CD that came with the printer into your CD-ROM drive.
1.
The CD Browser launches automatically. If it does not, double-click
the Kodak680x.exe file in the CD root directory.
Select your language.
2.
Click Software.
3.
NOTE: Before installing the software, read the Calibration Software Readme
file for important information and updates about the software.
Click Calibration Software to start the installer.
4.
Follow the on-screen instructions to install the calibration software.
5.
Before you use the calibration utility, make sure you are familiar with how
your KODAK Photo Printer operates.
Calibrate your printer whenever the color balance of prints does not look
right. You may also want to calibrate your printer after it has been serviced.
Easy Cal is a five-step process that quickly calibrates your printer using the
Visual Gray Balance method. Before using Easy Cal, start the calibration utility.
Select Start > Programs > KODAK Calibration Utility.
1.
The following dialog box appears.
3-1