Omron CJ - REFERENCE MANUAL 02-2010 Reference Manual page 25

Name
SYSMAC WS02-CX@@-V@
CX-Programmer Operation Manual
SYSMAC CS Series
CS1D-CPU@@H CPU Units
CS1D-CPU@@S CPU Units
CS1D-DPL1 Duplex Unit
CS1D-PA/PD@@@
Duplex System Operation Manual
NSJ Series
NSJ5-TQ@@(B)-G5D/M3D, NSJ5-SQ@@(B)-G5D/M3D,
NSJ8-TV@@(B)-G5D/M3D, NSJ10-TV@@(B)-G5D,
NSJ12-TS@@(B)-G5D
Operation Manual
SYSMAC WS02-CX@@-V@
CX-Programmer Operation Manual
Function Blocks/Structured Text
SYSMAC CS/CJ Series
CQM1H-PRO01-E, C200H-PRO27-E, CQM1-PRO01-E,
CS1W-KS001
Programming Consoles Operation Manual
SYSMAC CS/CJ Series
@@
CS1W-SCB -V1, CS1W-SCU
@@
CJ1W-SCU -V1
Serial Communications Boards/Units Operation Manual
SYSMAC WS02-PSTC1-E
CX-Protocol Operation Manual
CXONE-AL@@C-V3/AL@@D-V3
CX-Integrator Operation Manual
CXONE-AL@@C-V3/AL@@D-V3
CX-One Setup Manual
!WARNING
Failure to read and understand the information provided in this manual may result in per-
sonal injury or death, damage to the product, or product failure. Please read each section
in its entirety and be sure you understand the information provided in the section and
related sections before attempting any of the procedures or operations given.
CS/CJ/NSJ Series Instructions Reference Manual (W474)
Cat. No.
W446
W405
W452
W447
W341
W336
@@
-V1,
W344
W464
W463
Contents
Provides information on how to use the CX-Pro-
grammer for all functionality except for function
blocks.
Provides an outline of and describes the design,
installation, maintenance, and other basic opera-
tions for a Duplex System based on CS1D CPU
Units.
Provides the following information on the NSJ-
series NSJ Controllers:
Overview and features
Designing the system configuration
Installation and wiring
I/O memory allocations
Troubleshooting and maintenance
Use this manual in combination with the following
manuals: SYSMAC CS Series Operation Manual
(W339), SYSMAC CJ Series Operation Manual
(W393), SYSMAC CS/CJ Series Programming
Manual (W394), and NS-V1/-V2 Series Setup
Manual (V083)
Describes the functionality unique to the CX-Pro-
grammer and CP-series CPU Units or CS/CJ-
series CPU Units with unit version 3.0 or later
based on function blocks or structured text pro-
gramming. Functionality that is the same as that
of the CX-Programmer is described in W446
(enclosed).
Provides information on how to program and
operate CS/CJ-series PLCs using a Programming
Console.
Describes the use of Serial Communications Unit
and Boards to perform serial communications
with external devices, including the usage of stan-
dard system protocols for OMRON products.
Describes the use of the CX-Protocol to create
protocol macros as communications sequences
to communicate with external devices.
Describes operating procedures for the CX-Inte-
grator Network Configuration Tool for CS-, CJ-,
CP-, and NSJ-series Controllers.
Installation and overview of CX-One FA Inte-
grated Tool Package.
xxvii