Timh/Timhx - Omron CJ - REFERENCE MANUAL 02-2010 Reference Manual

TIMH/TIMHX

Instruction
TEN-MS TIMER
BCD
Symbol
Applicable Program Areas
Function block
Area
definitions
Usage OK
Operands
Operand
N Timer Number
S Set Value
N: Timer Number
The timer number must be between 0000 and 4095 (decimal).
S: Set Value
TIMH: The set value must be between #0000 and 9999 in BCD mode.
TIMHX: &0 to 65535 decimal or #0000 to FFFF hex
Operand Specifications
Word addresses
Area
CIO WR HR
N --- --- ---
S OK OK OK
Flags
Name
Error Flag
Equals Flag
Negative Flag
Note In CS1D CPU Units for Duplex Systems, CS1 CPU Units, and CJ1 CPU Units, these are turned OFF.
CS/CJ/NSJ Series Instructions Reference Manual (W474)
Mnemonic Variations
TIMH ---
TIMHX ---
TIMH
TIMH(015)
N
N: Timer number
S
S: Set value
Block program areas Step program areas
Not allowed OK
Description
AR T C DM EM
--- --- --- ---
OK
OK OK OK OK
Label
P_ER • ON if N is indirectly addressed through an Index Register but the address in the Index Register is not
the address of a timer Completion Flag or timer PV.
• ON if in BCD mode and S does not contain BCD data.
• OFF in all other cases.
P_EQ Unchanged (See note.)
P_N Unchanged (See note.)
Function
code
015
TIMH(015)/TIMHX(551) operates a decrementing
timer with units of 10-ms.
551
Binary
Subroutines
OK
Data type
TIMH
TIMER
WORD
Indirect DM/EM
addresses
Con-
stants
@DM *DM
DR
@EM *EM
--- --- --- ---
OK OK OK OK
Operation
3. Instructions
Function
TIMHX
TIMHX(551)
N N: Timer number
S
S: Set value
SFC action or transition
Interrupt tasks
programs
Not allowed OK
Size
TIMHX
TIMER 1
UINT 1
Registers Flags
Pulse
bits
Indirect
IR TK CF
using IR
--- OK --- ---
3
TR
bits
--- ---
219