Zone - Omron CJ - REFERENCE MANUAL 02-2010 Reference Manual

ZONE

Instruction
DEAD ZONE CONTROL
Symbol
Applicable Program Areas
Function block
Area
definitions
Usage OK
Operands
Operand
S Input word
C First limit word
D Output word
C: First Limit Word
15
C
15
C+1
Operand Specifications
Word addresses
Area
CIO WR HR
S
C OK OK OK
D
Flags
Name
Error Flag
Greater Than Flag
Equals Flag
Less Than Flag
Negative Flag
CS/CJ/NSJ Series Instructions Reference Manual (W474)
Mnemonic Variations
ZONE @ZONE
Block program areas Step program areas
OK OK
Description
0
Negative bias
0
Positive bias
AR T C DM EM
OK OK OK OK OK
Label
ER • ON if the upper limit is less than the lower limit.
• OFF in all other cases.
> • ON if the input data (S) is greater than the upper limit.
• OFF in all other cases.
= • ON if the result is 0.
• OFF in all other cases.
< • ON if the input data (S) is less than the lower limit.
• OFF in all other cases.
N • ON if the leftmost bit of the result is "1."
• OFF in all other cases.
Function
code
Adds the specified bias to input data and outputs
682
the result.
ZONE
ZONE(682)
S: Input word
S
C: First limit word
C
D D: Output word
Subroutines
OK
Data type
INT
UDINT
UINT
Indirect DM/EM
addresses
Con-
stants
@DM *DM
DR
@EM *EM
OK OK
OK OK ---
---
OK
Operation
3. Instructions
Function
SFC action or
Interrupt tasks
transition programs
OK OK
Size
1
2
1
Registers Flags
Pulse
bits
Indirect
IR TK CF
using IR
--- OK --- ---
3
TR
bits
--- ---
661