Shock Removal / Installation; Shock Replacement - Polaris RZR 800 2013 Manual

Exploded View (RZR 4)

Shock Removal / Installation

1. Elevate the vehicle off the ground to relieve the
suspension load.
2. Remove the upper and lower fasteners retaining the
shock and remove the shock from the vehicle.
3. Reverse the procedure to reinstall the shock. Torque
new fasteners to specification (refer to exploded
views).

Shock Replacement

1. Using a spring compressor, compress the shock
spring far enough to remove the spring retainer.
BODY / STEERING / SUSPENSION
2. Remove the spring and adjusting cam from the
3. Compress the shock spring and install the spring
4. Reinstall the shock onto the vehicle and torque new
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.
existing shock and install components onto the new
shock.
retainer.
IMPORTANT: The spring retainer gap should be
180° from the end of the spring upon installation.
fasteners to specification (refer to exploded views).
5
5.49