Table of Contents
Advertisement
Quick Setup Submenu
Figure 19.
Quick Setup Submenu
The Quick Setup submenu is displayed by default when the OSD is first opened, and provides quick access to
frequently-used settings. This submenu contains the following items, which also appear on other submenus in the
system:
•
INn: Input Mode — Displays the video format (such as HDMI/DTP/XTP or DisplayPort) of the connected
input.
•
INn: EDID — Press the ƒ and „ buttons to select the resolution or the rate list. Press the
navigate through the selected list. Selecting Auto (the default) from the resolutions list matches the current
output resolution. There are also 10 custom options, prefaced by C1 through C10.
•
Output Rate — Press the
Output Rate
on page 32
C10. The default setting is 1080p @ 60 Hz.
•
Audio Mute — Press the
default is Off.
•
Test Pattern — Press the
Test Pattern
on page 37 on the OSD Advanced submenu). The available test pattern selections are Crop,
Alternating Pixels, Crosshatch, Color Bars, Grayscale, and Audio Test (pink noise). The default
setting is Off.
•
DHCP Mode — In DHCP mode, the unit is assigned an IP address when it connects to the network. Press
>
the
and
buttons to toggle between enabling (On) and disabling (Off) DHCP mode. The default is Off.
<
•
IP Address — Press the ƒ and „ buttons to switch between octets. Press the
the value of a selected octet. The default address is 192.168.254.254.
>
and
buttons to select from a list of output resolutions and refresh rates (see
<
on the Output submenu). There are 10 custom options, prefaced by C1 through
,
>
and
buttons to toggle between mute (On) and unmute (Off) for the audio. The
<
>
and
buttons to select a test pattern to display, or to turn test patterns off (see
<
DTP2 CrossPoint 82 Scaling Presentation Matrix Switchers • Operation
>
and
buttons to
<
>
and
buttons to change
<
26
Advertisement
Table of Contents
