Table of Contents
Advertisement
Output Submenu
Figure 24.
Output Submenu
The Output submenu enables you to configure the output resolution, refresh rate, HDMI and TP format, TP mode,
HDCP notification, and Loop Out format and connected input.
•
Output Rate — Select this item to specify the output resolution and refresh rate. The DTP2 CrossPoint 82
switchers have a range of resolutions from which to choose (see the
Rates
table on the next page for the available settings). The available rates depend on the selected
resolution.
Ten custom user-defined output rate slots are also available to be defined via SIS commands or via the
Capture EDID item on the Input menu.
When a resolution is applied to a user-defined EDID slot, its name is displayed in the Output Resolution
panel in the format cn: nnnnxnnnn @ nn (XXX). An example would be C1: 1280x780 @ 60 Hz (EXN) (the last
three letters in parentheses represent the name of the manufacturer of the device).
NOTE: The 10 custom, user-defined output rates default to 1080p @ 60 Hz when no custom EDID is
captured or uploaded.
DTP2 CrossPoint 82 Scaling Presentation Matrix Switchers • Operation
Output Resolutions and Refresh
32
Advertisement
Table of Contents
