Shining 3D Transcan C User Manual page 53

Point-Line Fit
Best Fit
9.3.2. Align
Use this mode to modify the alignment of the data to the global coordinate. This action is useful for
post processing or reverse engineering.
The transformations do not affect the shape and size. Once you align to the new position and exit the
alignment interface, the previous position can only be restored by reloading the file.
Enter/Exit the Movement menu.
Click the Movement button to display the menu, click again to close the menu.
Exact movement
Enter the value in mm and degrees, click Apply to match the data origin to the input coordinate and
orientation
The arrows represent the global coordinate system, Red=X+, Green=Y+, Blue=Z+
Click Reset to cancel the transformation to original position
Shining 3D Transcan C_User Manual_V1.4.1
selected are co-linear

The plane generated includes the point and
the line (The line should be created in
advanced)

Click on the line previously created, or select
Line should be it from the drop-down

created in Click on the data to select a point or click on a
advanced feature point previously created

In the Choice list select one of the elements
to reselect it
Feature creation failed! Error code 6= the point
selected belongs to the line

Press Shift+ LMB to select an area, press ctrl +
LMB to unselect.

The plane generated is the position with the
smallest deviation from the selected area
Recommend method to create plane
Exact Movement Menu
53