Mesh; Create Mesh (Watertight/Unwater Tight) - Shining 3D Transcan C User Manual

8. Mesh

8.1. Create Mesh (Watertight/Unwater tight)

When scanning and editing are completed, click
8.1.1. Mesh
There are 2 types of mesh are available: Watertight and Unwater tight.
Watertight
All holes will be filled automatically. The data
can directly be 3D printed.
Watertight quality:
TEXTURE WATERTIGHT
The texture capture is separate from the 3d data capture. If the texture has been captured,
it will still be displayed on areas where holes are filled in the mesh processing. If the texture is
missing, the corresponding mesh data will be in black.
Shining 3D Transcan C_User Manual_V1.4.1
to create mesh.
Unwater tight
Unclosed model stays the way it is scanned.
Processing time is quicker than Watertight.
Choose quality
40