Related Manuals for Shining 3D EinScan Pro 2X
Summary of Contents for Shining 3D EinScan Pro 2X
- Page 1 USER MANUAL EinScan Pro 2X / 2X Plus / EP EXScan Pro Software V3.3 July 2019 SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
-
Page 2: Table Of Contents
Adjust Brightness ......................48 5.2. Scan with Fixed Mode......................48 5.2.1. Capture ........................... 48 5.2.2. Edit Scan ......................... 48 5.3. Scans & Groups ........................50 SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... - Page 3 Go back to scan ....................... 89 8.4. Measurement ........................90 8.4.1. Create feature ......................... 90 8.4.2. Movement ........................93 8.4.3. Measurement ......................... 95 8.5. Save ............................. 97 SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
- Page 4 Scan without Features ..................... 129 11.4. Pause menu ........................130 11.4.1. Auto-save ......................... 130 11.4.2. Edit menu ......................... 131 11.4.3. Point cloud optimization ..................132 SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
-
Page 5: About Shining 3D
Please review this document to help you operate your scanner. If you have more questions that are not answered here, please feel free to email us at einscan_support@shining3d.com. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 6: Hardware
The components may be different as listed when you purchase other accessories or change any item with your supplier. Please check carefully when opening the package. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 7: Specifications
Able to export watertight 3D model directly to 3D printing Output Data Format OBJ, STL, ASC, PLY, 3MF, P3 Scanner Body 1.13 kg (including the USB3.0 cable) Weight SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 8: Einscan Pro 2X Plus
Output Data Format OBJ, STL, ASC, PLY, 3MF, P3 Scanner Body 1.13 kg (including the USB3.0 cable) Weight Supported OS Win7/Win8/Win10 64 bit SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 9: Einscan Pro 2X
Printable Data Output Data Format OBJ, STL, ASC, PLY, 3MF, P3 Scanner Body 1.13 kg (including the USB3.0 cable) Weight Supported OS Win7/Win8/Win10 64bit SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 10: Hardware Introduction
Display memory >4G Memory Storage 32G or more At least one USB 3.0 Screen display 1920*1080 DPI: 100%; 125% 3840*2106 DPI: 100%; 200% SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 11: Set Up
Plug the power cable into the power port of the cable. (2-3) To guaranty a stable connection, plug the scanner via a powered USB 3.0 hub (>5V). SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... - Page 12 Cable with clip After plugged into the computer, check the Device Manager. The scanner should be displayed like the following picture. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
- Page 13 If the drivers are not installed properly, or the Alert “device off-line” keeps coming back. Right click on the SHINING-CAM and uninstall the driver. Unplug and replug the USB, Windows will reinstall the drivers by itself. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
-
Page 14: Software
Step 3: Download the installer. Save or Save as in the desired location on your computer. 2.2. Software installation Note: Administrator rights are required for the installation of the software only. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... - Page 15 Double click installation package, accept the modification on your computer Choose the installation language, then click OK. Select installation language Follow the instruction on the pop-up window SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
- Page 16 You must accept the agreement to install EXScan Pro. Click the Checkbox and click Next to approve the Privacy Notice SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
- Page 17 Choose the default installation path or click the Browse button to select the installation path. Default installation path is recommended. Wait for the installation to be completed SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
- Page 18 When the installation is completed, there will be a shortcut Icon of the software on the desktop. The shortcut in the Start Menu is shown as below: EXScan Pro on the start menu SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
-
Page 19: Uninstall Software
Or go to Control Panel > Programs > Program and Features, choose EXScan Pro and right click to uninstall. Follow the instructions step by step. Click Yes to uninstall the software SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 20: Update
If a new version is available, a pop-up will show when you start the software. Update Reminder Click Yes to update the software version SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 21: Firmware Upgrade
Click “Upgrade”, software will close automatically, and firmware upgrade program will start. Firmware upgrade program Click “Upgrade”, wait around 1 minute, the firmware starts to upgrade. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... - Page 22 Reconnect the device, and open the software again, the device is running under the latest firmware. Firmware Upgrading Complete If the upgrading is failed, recovery will run. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
- Page 23 If recovery fails, turn off the power of the scanner and reconnect the scanner to restart the software for upgrading. A failed recovery SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
-
Page 24: Device Activation
You can find the serial number from the sticker on the scanner or label on packing box listing as “EinscanXXX-XXXXXXXXXX”. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... - Page 25 Connection failed, check your internet connection or do local activation Save the .PLE file on your PC, then on the activation menu. click “ ” to reveal the “Local activation” button SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
- Page 26 Browse and import the .PLE file. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
-
Page 27: Interface And Parameters
Navigate between different menu by click on the circle. Navigation bar 2.7.2. Settings Click the settings logo from the upper right to open the drop down menu. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... - Page 28 This information will not contain your personal information or scanned data, and will not be accessible to any third party. This checkbox is selected by SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
-
Page 29: Einscan Community
Service live software updates, manual, video download can be accessed in user community. Register your EinScan at community.shining3d.com SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 30: Help Mode
Share your ID and password to allow our technicians to remote control of your computer during online technical support SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 31: Alerts
For incorrect configuration: try another USB port and update your graphics card drivers and restart the software. Graphics card incompatible USB not 3.0 SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... - Page 32 Device offline When the device is offline, meaning the scanner is not connected to PC, please check the connection and restart the software. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
- Page 33 Device offline or connection loose Offline status in navigation bar Mode not available Add-on is required for this function SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
-
Page 34: Calibration
After installation, when you open the software for the first time the software will enter the calibration mode by default. You can also choose Calibration on the navigation bar to enter calibration process later. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 35: Camera Calibration
Then lift the scanner to change the distance between the projector and calibration board according to the software guide. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... - Page 36 Do not move the board during the capture When pictures of one position are well collected, the software will turn to the next position with buzzer as below: SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
- Page 37 “Next” to move on to the HD calibration or white balance as the software indicates. Or it will go back to the scan mode selection interface if there is no other calibration required. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
-
Page 38: Hd Calibration (Only Required For Einscan Pro 2X)
The software will then calculate. HD calibration result Go back to the scan mode selection page by clicking “Next” at the bottom left. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 39: Accuracy Test
Follow the instructions on the video and on the screen to capture the different pictures. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 40: Before Scan
During scanning the shape of the object needs to be maintained without any changes (human bodies must be held still, for example). SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 41: Preparation
If the object is small enough for each frame (scanning field of view), markers can be placed around the object. Make sure the object will not move from its support SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 42: Select Scan Mode
Before scanning transparent, highly reflective and black objects, you should spray white powder on the surface (see example above). 4.3. Select Scan Mode EinScan Pro 2X Plus SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... - Page 43 The tables above show the details of each scan mode that can be selected. For limitations of each scan mode refer to the specifications presented previously. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
-
Page 44: Scan Workflow
4.4. Scan Workflow SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 45: Fixed Mode (Industrial Pack Required)
‘Save’ to enter the scan parameters window. Texture scan is only active when the texture camera (Color Pack) is attached to the scanner. Create a project, fixed scan SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 46: Working Distance
Optimal distance (mm) Upper limit (mm) At the proper working distance, the cross should be seen clearly with a sharp contour on the surface. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 47: Interface
Note: Right Click on the camera preview to display the Right camera in the window. You will see the parts shown in the window from right camera. The parts which can be seen by both cameras SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 48: Adjust Brightness
SHIFT + Left mouse: Select unwanted points, the selected points will turn red, as shown below. Ctrl + Left mouse: Deselect selected data. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... - Page 49 Then change the position of the scanner or the object to scan again. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
-
Page 50: Scans & Groups
The group can be deleted or split to realign with other group data or single data. Disable texture (color pack) to select scan by left mouse on the 3d view SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 51: Edit Scan(S)/Group(S)
SHIFT + click left mouse button to select at least 3 non-collinear corresponding points in the 3D preview windows for Manual Alignment, as shown below. Ctrl+Z: cancel last point picked SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... - Page 52 Click Confirm to validate the modification and go back to the scan interface Click Reset to go back to the scan interface Click Next to continue to align scans SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
-
Page 53: Hd Mode
HD Prime pack is attached and the scanned object has enough geometric features. It is only applicable to the EinScan Pro 2X Plus (2X+). SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... - Page 54 If you want to use a previously created Global Marker File (GMF), you may click browse to import one as .ASC, .TCT or .P3. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
- Page 55 Browse to load a GMF SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
-
Page 56: Scan
Check the working distance ● Adjust the brightness sensitivity ● Ensure that the markers are well captured. Exit Preview mode and start the scan SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 57: Scan Distance
Adjust the scanner position until the range finder’s color turns green. Closer limit (mm) Optimal distance (mm) Upper limit (mm) SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 58: Brightness
Exposure adjustment menu, press +/- or click and drag the cursor Adjust the brightness according to the following illustration: Red means overexposed, black is underexposed, and white or light grey is good. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 59: Start Scan
During scanning make sure to keep the scanner perpendicular to the surface, keep a proper distance from the object, and adjust the brightness depending on the ambient light and texture of the object. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 60: Alignment
To record the data, a minimum of 4 markers (displayed in red) in each frame (every scanning field of view) has to be captured. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 61: Pause Menu
6.4. Pause Menu In offline mode, the data can be loaded at this step for editing. 6.4.1. Auto Save Enter pause menu press SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 62: Point Cloud Optimization
SHIFT + Left mouse：Select redundant area, the selected section will be displayed in red, as shown below. Ctrl + Left mouse: Deselect the selected data SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... - Page 63 Click Check to End the editing and confirm to save the edition in the project file and go back to the Previous menu. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
-
Page 64: Rapid Mode
In this example, the statue is 1m*1.5m*1.5m. Scan example with Rapid mode 7.1. Handheld Scanner Key Functions SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 65: Before Scan
At least 4 markers captured previously need to be seen by the scanner in each current scanning frame to be aligned. If not, “Track Lost” will be displayed. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... - Page 66 With Markers and Mixed alignment, you may click browse to import a previously created Global Marker File (GMF) as .ASC, .TCT or .P3. Browse to load a GMF SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
-
Page 67: Operation Mode
Choose High (0.25mm 2X+, 0.2 2X), Medium (1.0mm) or Low (1.5mm) or drag the cursor to choose another point distance setting from 0.2mm (2X) or 0.25 (2X+) to 3.0mm SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 68: Scan
When importing a project, and continuing to scan, the scanning resolution and alignment mode will be the same as the previous setting of the imported project. 7.3. Scan 7.3.1. Preview Start Preview mode press SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... - Page 69 After exiting preview and starting the scan, the preview mode will not show again for this scanning project. To access preview mode on a current project, reopen it. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
-
Page 70: Scan Distance
Adjust the scanner position until the rangefinder color turns green. Closer limit (mm) Optimal distance (mm) Upper limit (mm) Too Close Good Too Far SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 71: Brightness
Too bright (X) Good (√) Too dark (X) Double click Play button to exit the brightness adjustment window. 7.3.4. Start Scan Start/Restart scan press SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 72: Alignment
The currently captured area is green, and previously captured data is grey. To improve the scan efficiency, the scanner movement should be continuous and uniform. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... - Page 73 The green area is the current scan, as shown below. To record data a minimum of 4 markers (display in red) has to be captured. Interface with markers SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
-
Page 74: Pause Menu
7.4. Pause Menu In offline mode, the data can be loaded at this step for editing. 7.4.1. Auto Save Enter pause menu press SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 75: Point Cloud Optimization
SHIFT + Left mouse：Select unwanted data, the selected section will be displayed in red, as shown below. Ctrl + Left mouse: Deselect the selected data SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 76: Generate Point-Cloud
Previous menu. 7.5. Generate Point-cloud When finished editing, an optimized point-cloud will be generated. This step is accessible in Offline mode. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 77: Priority (For Rapid: Feature Or Hybrid Alignment Settings)
This optimization process consumes memory and takes a long time. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 78: Refine (For Rapid Mode: Lightning + Refine Option Mode)
Apply. Choose resolution The processing time depends on the resolution requested and the amount of points captured. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 79: Post Processing
SHIFT + Left mouse：Select redundant area, the selected section will be displayed in red, as shown below. Ctrl + Left mouse: Deselect selected data. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 80: Create Mesh
Generate the mesh model from the scanned point cloud data When the scan is completed, click Mesh Model. 8.2.1. Watertight / Unwatertight 2 types of mesh are available: Watertight and Unwatertight. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... - Page 81 Choose mesh resolution Note: If some data are not connected. Watertight will keep only the biggest data. Possible error: The mesh displays without shade effect. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
-
Page 82: Mesh Editing
EXScan Pro includes the following mesh editing tools. 8.3.1. Select and delete Press Shif+LMB to select data and enter the selection menu SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 83: Data Simplification
8.3.2. Data Simplification Enter/Exit the simplification menu Click the Data simplification button to display the simplification menu, click again to close the menu SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... - Page 84 Clicking Apply twice, the data will be simplified 2 times. The comparison of detail between before simplification and after simplification (at 30% simplify proportion). Before simplification After simplification SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
-
Page 85: Hole Filling
Click Apply to validate the modification Click Cancel to undo the modification No markers fill With markers fill Manual Fill Enter/Exit the Manual Fill menu SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... - Page 86 Auto fill Enter/Exit the Auto Fill menu Click the Auto Fill button to display the Auto Fill menu, click again to close the menu SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
-
Page 87: Smooth
Click the Smooth button to display the smooth menu, click again to close the menu Smooth menu Pick High (85%), Medium (50%) or Low (15%) or set the ratio from 1 to 100 SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 88: Sharpen
8.3.5. Sharpen Enter/Exit the sharpen menu Click the Sharpen button to display the menu, click again to close the menu SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 89: Go Back To Scan
You can do more scans, redo editions, or remesh. The mesh data will NOT be saved automatically. Note: SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 90: Measurement
Click Open file, a STL or OBJ file can be import to edit. 8.4.1. Create feature Enter/Exit the Feature menu Click the Feature button to display the menu, click again to close the menu SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... - Page 91 The features created displaying in green, the selected feature are in Red. In the feature list, click “delete button” to remove (Delete action cannot undo). SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
- Page 92 The point generated is the intersection between the non-parallel line and plane Feature creation failed! Error code 9: the line is parallel to the plane SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
-
Page 93: Movement
Start from data reposition (offset 0,0,0) Edit rotations prior to transformation Change the view normal to a reference plane to change the corresponding angle SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... - Page 94 Select a Point in the drop-down menu. The data will be translated to match the point with the origin point (coordinate 0,0,0) Click Move to perform the transformation SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
-
Page 95: Measurement
This tool calculates the distance between two points belonging to the surface of the data Click on the data to pick the first and second point, select one of the two points to redo it. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... - Page 96 This tool calculates the volume contains in a watertight mesh. It returns the volume in mm^3 and the coordinates of the smallest box, parallel to the global coordinates, containing all the data. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
-
Page 97: Save
See *8.3.3+ to fill holes on your data File not watertight alert 8.5. Save 8.5.1. Export Data Save the data Click Save to export the data. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... - Page 98 ◆ Reverse Engineering ◆ Compatibility with most mesh editing software ◆ Artistic applications Mesh, scan.obj ◆ 3D rendering (separated Texture & scan.jpg SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
-
Page 99: Scale Data
Upload the data to Sketchfab.com directly, which is a famous online 3D data store. Click Upload after mesh to share data, it will show the dialog as below. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 100: Third-Party Software
Geomagic is mainly used in reverse design of grid data. If the Geomagic has been installed, click this button to open the Geomagic and import the merged stl data into the Geomagic. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 101: Model Preview
> Shining3d_EXScanPro > Model Preview Drag files into the window for preview. Manipulate the data with the same control as EXScan software SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... - Page 102 Note: To load a OBJ textured file make sure to have the MTL and JPG files with the same name and in the same folder than the OBJ SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
-
Page 103: Color Pack
Turn the hook (rotary lever) to the right to lock the camera in position. (3) Power on the scanner and the camera driver will start by itself. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 104: Calibration
Calibration with the normal method (see “camera calibration”). The LED rings of EinScan and the texture camera will blink synchronously. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 105: White Balance
Click Start or Press Play, move up and down until you find the optimal distance position. Stay still. While LED and white light are projected White Balance calibration interface SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... - Page 106 If the texture doesn’t give you satisfaction, please optimize the lighting environment and redo White balance. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
-
Page 107: Fixed Mode
Run the same way that described above. After every single scan, the LED of the texture camera will flash and the texture camera will record one frame data. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 108: Alignment
If the texture is misaligned to the data, check that the camera is well placed and locked. And redo the calibration. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 109: Rapid Mode
Data and texture are captured from a different angle. In case of sharp edges, texture-data can be misaligned, try to scan from a different angle. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 110: Alignment
If the texture is missing, the corresponding mesh data will be in black. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 111: Texture Remapping
Edition on the mesh (simplification, hole filling) will affect the texture rendering. By doing the texture remapping, the texture information will be reapplied on the mesh. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 112: Texture Layout Optimization
3 party software. This option has no effect on the texture itself. Click Apply to continue. TLO option in texture blending SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 113: Brightness & Contrast
This modification is not saved in the project file. Export the data to save the texture editing. 9.5.6. Export Data Save the data SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 114: Best Practice
How to edit or remove markers on the texture? Use a 3 party software like Photoshop or Gimp, save as OBJ and erase the markers on the matching JPG file. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 115: Industrial Pack
Make sure to check the advice for Fixed Mode when using the turntable (see above). Check the Device manager. The turntable will be displayed as below. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 116: Scan
If you add the turntable during a fixed scan project, click Scan Mode selection in the navigation bar, and reopen the project. Go back to Scan mode selection menu 10.4. Turntable Steps Turntable step input SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 117: Alignment Condition
At least 4 common targets need to be recognized between 2 neighboring scans. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 118: Feature Alignment
Using feature alignment, make sure that the object is kept still on the turntable, and the first view should contain enough features to allow the initialization. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 119: Markers Alignment And Global Markers Alignment
Markers alignment works in a similar way as turntable coded target alignment; the software matches 2 neighboring scans by recognizing at least 4 common markers. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... - Page 120 Global Markers is accessible if a Global Marker File has been loaded during the project creation. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
-
Page 121: Hd Prime Pack
Plug the scanner to the computer then plug in the power cable; the drivers will install automatically. To remove HD Prime, rotate the hook (rotary lever) clockwise before unplug. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 122: Calibration
Use the front side (Black) of the calibration board for Prime calibration. In the calibration interface, run the Calibration with the normal method (see “camera calibration”) SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 123: Before Scan
Create a new project, to enter the scan settings window IR ON indication When entering the Prime scan mode Prime IR projector will be ON, the side LED will turn orange. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 124: Align Mode
The project will be saved with the extension .pri_prj If you choose Markers Align Mode, GMF is available Import GMF Click Browse to import the GMF as .P3 .TXT or .ASC SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 125: Resolution
When import project, and continue the scan, the scanning resolution and align mode will be in accordance with the previous setting of imported project. Click Apply to validate and enter the Scanning interface SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 126: Hd Prime Scan
Preview mode. In this mode, it will start to show data for preview, but not yet record. Preview with or without markers Check the box “Prime camera” to replace the display of the normal camera(s) with Prime camera(s). SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 127: Brightness
“+/ -” buttons on the scanner, or drag the cursor under the camera preview to left (-) or the right (+). SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 128: Scan With Markers
The software will recognize the markers (display in red), record data and align with previously collected markers (display in green). The data is captured along the lines, as shown below SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 129: Scan Without Features
When start scanning, the data is captured along the lines, previously captured data shows grey as below. To improve the scan efficiency, the movement should be continuous and uniform. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 130: Pause Menu
Track lost alert 11.4. Pause menu In Off-line mode the data can be loaded at this step for editing. 11.4.1. Auto-save Enter pause menu press SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 131: Edit Menu
Click the button or “DELETE” in the keyboard to delete selected data. Undo You can only undo the last deleted data. Note: Handheld scan mode does not support the deletion of markers. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 132: Point Cloud Optimization
The optimization includes a realignment of the data by markers position recalculation. In case of thin objects with 2 opposite faces, markers should be registered following a closed loop to allow re-positioning. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 133: Support And Contact
Log In To register a user account, please enter the serial number of the scanner and your contact information including a valid email. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 134: Validate Your Warranty
To validate the warranty of your device, click add new device in My Account. Account page Input the serial number, input the date of purchase and upload the copy of the invoice. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... -
Page 135: Submit A Ticket
Log in with your Community account. Click New Ticket on the tab bar. Select the serial number among the registered accounts and describe your problem. SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019... - Page 136 Submit a ticket Check your submitted tickets under the account page or the Ticket > My tickets. Opened ticket SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
-
Page 137: Contact Us
SHINING 3D Technology Inc. San Francisco, United States Phone: +1 415 259 4787 Add: 1740 Cesar Chavez St. Unit D. San Francisco, CA 94124 SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019...
Need help?
Do you have a question about the EinScan Pro 2X and is the answer not in the manual?
Questions and answers