Shining 3D Transcan C User Manual page 5

5) Connect the power cord and cables.

Confirm that power switch ④ is not pressed.

Connect the power cord port ⑦ and the adapter port ⑥ first.

Inserted adapter socket ⑤ into the device ③ port.

Insert the power cord triangular plug into the plug or socket.

Connect the computer USB 3.0 port and device socket ② with the device connection
cable.

If using a light box, plug the light box connection cable into port ①.
Shining 3D Transcan C_User Manual_V1.4.1 5