Update The Software - Shining 3D Transcan C User Manual

Note:

Do not disconnect the scanner, or unplug the power during the upgrade.

Recovery will start from a failed upgrade. You can restart the firmware update after
successful recovery.

If recovery fails, turn off the power of the scanner and reconnect the scanner to restart
the software for upgrading.

2.4. Update the Software

When a new version is available, a pop-up will show when you start the software to remind you
update your software to the latest version.
Note:
After clicking Download Now, the software will be downloaded (do not close the software).

Click Yes to update.
Shining 3D Transcan C_User Manual_V1.4.1
Firmware doesn't match
Firmware upgrading
Update Reminder
10