Installation; Modules Using Konect Pakbus Router (Private Dynamic Ip); Configure Data Logger - Campbell CR300 Series Product Manual

Compact datalogger
Hide thumbs Also See for CR300 Series:
Table of Contents

Advertisement

12.2 Installation

12.2.1 Modules using Konect PakBus Router (private dynamic IP)

12.2.1 Modules using Konect PakBus Router (private
dynamic IP)

12.2.1.1 Configure data logger

 1. Connect the cellular antenna, if it is not already connected. When using a MIMO antenna
with multiple cellular connections, connect the primary cable to Cellular and the secondary
to Diversity. If the cables are not marked in this way, they can be connected to either
antenna port.
 2. Connect to your data logger by using Device Configuration Utility.
41
46
41
43
45
12. Cellular communications option     41

Advertisement

Table of Contents
loading

Table of Contents