Wifipassword; Wifipowermode; Wifissid (Network Name); Wifistatus - Campbell CR300 Series Product Manual

23.3.61.11 WiFiPassword

If joining a WPA or WPA2 security enabled network then this is where the passphrase is entered.
If joining a WEP security enabled network then this is where the WEP key is entered.
If creating a network and a password is supplied, the network will be created using WPA2
encryption. The password must be at least 8 characters. If a password is not supplied, an open
(unencrypted) network will be created.
When joining a network the device supports 64-bit WEP and 128-bit WEP. For 64-bit WEP enter a
40 bit key in the form of 5 ASCII characters or 10 hexadecimal digits (0-9, A-F). For 128-bit WEP
enter a 104 bit key in the form of 13 ASCII characters or 26 hexadecimal digits (0-9, A-F).
String data type
l

23.3.61.12 WiFiPowerMode

This setting controls the power saving mode of the device. Regardless of the Power Mode
setting, the device enables power-save mode when communications are not active. Power Mode
determines how the device acts when communications are ongoing. This setting only applies
when the device is configured to Join a Network using the Configuration option.
Long data type
l

23.3.61.13 WiFiSSID (Network Name)

The Network Name (SSID) is the name that identifies a wireless network (31 character maximum).
The SSID differentiates one wireless network from another, so all devices attempting to connect
to the same network must use the same SSID. If the device is configured to 'Join a Network', then
enter the SSID of the network, including hidden networks, to join here. If the device is configured
to Create a Network using the Configuration option, then the SSID entered here will be the SSID
of the network created.
NOTE:
When creating a network, the device will not create the network if the Network Name (SSID)
specified is the same as one that already exists in the area.
String data type
l

23.3.61.14 WiFiStatus

Specifies the current status of the Wi-Fi module.
23. Information tables and settings (advanced) 237