Wifieapmethod; Wifieappassword; Wifieapuser; Networks - Campbell CR300 Series Product Manual

Long data type, where:
l
0 = Join network
o
1 = Create network
o
4 = Disable network
o

23.3.61.6 WiFiEAPMethod

The EAP Method must be chosen to match the EAP method being used by the Enterprise
Security network. The inner EAP Methods supported are MSCHAPv2, MSCHAP, CHAP, and PAP.
Long data type
l

23.3.61.7 WiFiEAPPassword

If joining an Enterprise Security-enabled network enter password here.
String data type
l

23.3.61.8 WiFiEAPUser

If joining an Enterprise Security-enabled network enter user name here.
String data type
l

23.3.61.9 Networks

Lists the networks available in the area. Information listed for each network is shown as {SSID,
RSSI / Signal Strength, Channel, Security}. Sometimes areas are covered by multiple access points
configured with the same network name (SSID). In that case multiple unique access points
possessing the same network name (SSID) may be listed here.
String data type
l
Read only
l

23.3.61.10 WiFiEnable

Set to enable or disable the WiFi service. By default, WiFi is enabled. To disable, set the
Configuration option to Disable. 0 Disabled, 1 or <>0 Enabled.
Boolean data type
l
23. Information tables and settings (advanced) 236