Ipmasketh; Ipmaskwifi; Iptrace; Iptracecode - Campbell CR300 Series Product Manual

23.3.22 IPMaskEth

Specifies the subnet mask for the Ethernet interface. If the value of the Ethernet IP Address
setting is set to "0.0.0.0" (the default), the data logger will configure the effective value of this
setting using DHCP.
String data type
l

23.3.23 IPMaskWiFi

Specifies the subnet mask for the WiFi interface.
String data type
l

23.3.24 IPTrace

Discontinued; aliased to IPTraceComport

23.3.25 IPTraceCode

Controls what type of information is sent on the port specified by IPTraceComport and via Telnet.
Each bit in this integer represents a certain aspect of tracing that can be turned on or off. Values
for particular bits are described in the Device Configuration Utility. Default = 0, no messages
generated.

23.3.26 IPTraceComport

Specifies the port (if any) on which TCP/IP trace information is sent. Information type is controlled
by IPTraceCode.

23.3.27 IsRouter

This setting controls whether the data logger is configured as a router or as a leaf node. If the
value of this setting is true, the data logger will be configured to act as a PakBus router. That is, it
will be able to forward PakBus packets from one port to another. To perform its routing duties, a
data logger configured as a router will maintain its own list of neighbors and send this list to
other routers in the PakBus network. It will also obtain and receive neighbor lists from other
routers.
23. Information tables and settings (advanced) 216