Information Tables And Settings (Advanced) - Campbell CR300 Series Product Manual

23. Information tables and
settings (advanced)
Information tables and settings consist of fields, settings, and system information essential to
setup, programming, and debugging of many advanced CR300 series systems. In many cases,
the info tables and settings keyword can be used to pull that field into a running CRBasic
program. There are several locations where this system information and settings are stored or
changed:
Status table: The Status table is an automatically created data table. View the Status table
l
by connecting the data logger to your computer (see
70) for more information) Station Status
DataTableInfo table: The DataTableInfo table is automatically created when a program
l
produces other data tables. View the DataTableInfo table by connecting the data logger to
your computer (see
PC400 users, click the Monitor Data tab and add the DataTableInfo to display it.
o
LoggerNet users, select DataTableInfo from the Table Monitor list.
o
Settings: Settings can be accessed from the LoggerNet Connect Screen Datalogger >
l
Settings Editor, or using Device Configuration Utility Settings Editor tab. Clicking on a
setting in Device Configuration Utility also provides information about that setting.
Terminal Mode: A list of setting field names is also available from the data logger terminal
l
mode (from Device Configuration Utility, click the Terminal tab) using command "F".
Status, DataTableInfo and Settings values may be accessed programmatically using
l
Tablename.Fieldname syntax. For example: Variable = Settings.Fieldname.
For more information
stored-data-values
Communications and processor bandwidth are consumed when generating the Status and other
information tables. If data logger is very tight on processing time, as may occur in very fast, long,
or complex operations, retrieving these tables repeatedly may cause skipped scans.
Settings that affect memory usage force the data logger program to recompile, which may cause
loss of data. Before changing settings, it is a good practice to collect your data (see
Making the software
see: https://www.campbellsci.com/blog/programmatically-access-
.
Making the software
, then clicking the Status Table tab.
connection (p. 70) for more information).
23. Information tables and settings (advanced) 202
connection (p.
Collecting