Portstatus; Processtime; Progerrors; Progname - Campbell CR300 Series Product Manual

23.2.23 PortStatus

States of C terminals configured for control. On/high (true) or off/low (false). Array elements in
numeric order of C terminals. Default = false. Updates when state changes. Enter -1 to set to true.
Enter 0 to set to false.
Boolean data type
l

23.2.24 ProcessTime

Processing time (μs) of the last scan. Time is measured from the end of the
(after the measurement event is set) to the beginning of the
measurement event begins) for the subsequent scan. Calculated on-the-fly. Updated at the
conclusion of scan processing, prior to waiting for the next scan.

23.2.25 ProgErrors

Number of compile or runtime errors for the running program. Updated after compile.

23.2.26 ProgName

Name of current (running) program; updates at startup.
String data type
l

23.2.27 ProgSignature

Signature of the running CRBasic program including comments. Does not change with
operating-system changes. Updates after compiling the program.

23.2.28 RecNum

Record number increments when the Status Table is requested by support software. Range = 0
32
to 2 .
Long data type
l
EndScan
EndScan
(before the wait for the
23. Information tables and settings (advanced) 208
instruction