Radiotxpwr; Wi-Fi Settings - Campbell CR300 Series Product Manual

Packet Retries: Reports the number of radio packet transmissions to the PakBus neighbor
l
using the integrated radio link that had to be retransmitted by the radio module.
Packet Failures: Reports the number of radio packet transmissions to the PakBus neighbor
l
that were never acknowledged.
String data type
l
Where to find:
Settings Editor tab in Device Configuration Utility: Radio > Radio Performance Statistics
l

23.3.60.15 RadioTxPwr

Specifies the power level at which the RF module transmits.
Levels are approximate. It is very important that the TX power level selected and the gain of the
attached antenna do not exceed the maximum allowed ERP permitted by local laws. These rules
vary from region to region.
Long data type
l
Where to find:
Settings Editor tab in Device Configuration Utility: Radio > Radio TX Power Level
l

23.3.61 Wi-Fi settings

Access Wi-Fi settings, using Device Configuration Utility. Clicking on a setting in Device
Configuration Utility also provides information about that setting. These settings are available for
data loggers with integrated WIFI modules.
Where to find:
All settings: Settings Editor tab in Device Configuration Utility: Wi-Fi tab.
l
Key settings: in Device Configuration Utility: Deployment > Wi-Fi tab.
l
See also Wi-Fi communications
NOTE:
A list of Settings fieldnames is also available from the data logger terminal mode using
command F.
option (p. 29)
23. Information tables and settings (advanced) 234