Table of Contents
Advertisement
JUPITER-(3000K, 6000K, 9000K)-H1 Smart
Transformer Station
User Manual
Figure 4-4 Networking diagram of ring main units in CCV mode (8DJH series)
----End
Ring Main Units in CVC Mode (CGM Series)
Step 1 Check the status of STS 1, STS 2, and STS 3.
1.
2.
3.
Step 2 Check Sub-Station Line 1, turn on the earthing switch, turn off the disconnector,
and turn off the circuit breaker.
Figure 4-5 Networking diagram of ring main units in CVC mode (CGM series)
----End
Issue 02 (2023-09-30)
Check cabinet G1, turn on the earthing switch, turn off the load switch, open
the cable room door, check the cable connections and sealing, and then close
the cable room door.
Check cabinet G2, turn on the earthing switch, turn off the load switch, turn
on the circuit breaker, open the cable room door, check the cable connections,
lightning arrester, and cable sealing, and then close the cable room door.
Check cabinet G3, turn on the earthing switch, turn off the load switch, open
the cable room door, check the cable connections and sealing, and then close
the cable room door.
Copyright © Huawei Technologies Co., Ltd.
4 Power-On
67
Advertisement
Table of Contents
