Table of Contents
Advertisement
JUPITER-(3000K, 6000K, 9000K)-H1 Smart
Transformer Station
User Manual
Cord End Terminal Type - Socket Type
Step 1 Record the cable routes and remove cables 3UI:L:2, 3UI:N:2, and 3UI:PE:2 from the
STS.
Step 2 Install a new inverter module.
Figure 6-80 Installing an inverter module
Step 3 Connect the socket cable to the new inverter module and bind the cable along the
original route.
Issue 02 (2023-09-30)
NO TE
The socket cable is delivered with the inverter module. Connect the end without a plug to
terminals 15 (brown), 17 (blue), and PE (yellow-green) on 3XUPS1.
Copyright © Huawei Technologies Co., Ltd.
6 System Maintenance
211
Advertisement
Table of Contents
