Table of Contents
Advertisement
JUPITER-(3000K, 6000K, 9000K)-H1 Smart
Transformer Station
User Manual
Table 2-1 Port description
No.
1
2
3
4
5
6
7
8
9
10
11
Issue 02 (2023-09-30)
Silk
Item
Screen
MBUS
MBUS ports
L1/L2/L3
WAN
Ethernet
ports
LAN
SPF 1/2
SFP ports
DI1–DI4
DI ports
-
12 V output
power port
AI1–AI4
AI ports
DO1–DO2
DO ports
COM1–
COM ports
COM3
4G
4G antenna
port
RST
Restart
button
USB
USB port
Copyright © Huawei Technologies Co., Ltd.
Description
MBUS ports are not enabled.
Provide one WAN port and one LAN port,
supporting 10/100/1000 Mbit/s auto-
negotiation.
Support 100M and 1000M optical modules,
SFP and eSFP optical modules, and automatic
identification of optical module rates.
Wavelength supported by the optical
modules: 1310 nm (single-mode);
transmission distance: 12 km.
Provide four universal DI ports.
Supports 12 V DC output.
● AI1 is a voltage-type signal input port,
supporting a voltage range of 0–10 V.
● AI2–AI4 are current-type signal input ports,
supporting current ranges of 0–20 mA and
4–20 mA.
NO COM normally open contact; NC COM
normally closed contact. Support a maximum
of 12 V signal voltage.
Connect the RS485 cables.
-
Hold down the button for 3s to 10s to power
on and restart the WLAN module.
Hold down the button for more than 10s to
restore to the default IP address
(192.168.0.10). The restored IP address is valid
for 5 minutes.
Within 3 minutes after power-on and restart,
hold down the button for more than 60s to
restore to factory settings.
After a USB flash drive is inserted into the
USB port, you can use the app to perform
local maintenance operations on the main
control module, such as firmware upgrade
and data export.
2 Product Description
44
Advertisement
Table of Contents
