Huawei JUPITER-3000K-H1 Smart User Manual page 239

JUPITER-(3000K, 6000K, 9000K)-H1 Smart
Transformer Station
User Manual
● Ensure that the painting is thin, even, and smooth.
● In the case that a container pattern has different colors, to prevent undamaged
areas and those with different colors as the damaged area from being polluted
during repainting, cover such areas using white paper and adhesive tape before
repairing paint.
Figure A-7 Repainting a damaged area
Step 5 Wait for 30 minutes and check whether the painting meets the requirements.
----End
Paint Supply Information
Table A-1 STS paint requirements
Item
Primer thickness
Intermediate coat
thickness
Issue 02 (2023-09-30)
NO TICE
NO TE
● The color of the repainted area must be consistent with that of the surrounding area.
Use a colorimeter to measure the color difference (Δ
equal to 3. If a colorimeter is unavailable, ensure that there is no visible edge between
the repainted area and the surrounding area. The paint should also be free of bulges,
scratches, flaking, or cracks.
● If you choose to spray paint, it is recommended that you spray paint three times before
checking the result. If the color does not meet the requirements, paint more times until
the painting meets the requirements.
Requirement
40 μm
100 μm
Copyright © Huawei Technologies Co., Ltd.
), which should be less than or
E
Item Requirement
Primer type Epoxy zinc rich
paint
Intermediate coat Zinc-rich paint
type
A FAQ
231