JUPITER-(3000K, 6000K, 9000K)-H1 Smart
Transformer Station
User Manual
Step 5 Remove the faulty lightning arrester.
Step 6 Replace the conductive pole assembly with a new one.
Figure 6-15 Removing the conductive pole assembly
Step 7 Install a new lightning arrester.
Figure 6-16 Installing a new lightning arrester
Step 8 Tighten the nut on the conductive pole assembly.
Issue 02 (2023-09-30)
NO TE
Use a detergent to clean the insulation surface of the lightning arrester. After the detergent
is volatilized, evenly apply the silicon grease.
Copyright © Huawei Technologies Co., Ltd.
6 System Maintenance
153