Table of Contents
Advertisement
JUPITER-(3000K, 6000K, 9000K)-H1 Smart
Transformer Station
User Manual
Paint Damage
Slight scratch
(steel base
material not
exposed)
Smudges and rust
that cannot be
wiped off
Deep scratch
(primer damaged,
steel base
material exposed)
Logo and pattern
damage
Dent
Issue 02 (2023-09-30)
Tools and
Materials
Spray paint or
paint, brush
(required for
repainting a small
area), fine
sandpaper,
anhydrous
alcohol, cotton
cloth, and
painting gun
(required for
repainting a large
area)
Spray paint or
paint, zinc-rich
primer, brush
(required for
repainting a small
area), fine
sandpaper,
anhydrous
alcohol, cotton
cloth, painting
gun (required for
repainting a large
area)
If a logo or pattern is damaged,
provide the logo size and color
number. Seek help from the local
advertisement coating supplier to
formulate a repair solution based on
the logo size, color, and damage.
1. If a dent is less than 100 mm
area and less than 3 mm in depth,
fill the dent with Poly-Putty base
and then perform the same
operations as those for processing
deep scratches.
2. If a dent is greater than 100 mm
area or greater than 3 mm in
depth, ask the local supplier for an
appropriate repainting solution.
Copyright © Huawei Technologies Co., Ltd.
Procedure
Description
Steps 1, 2, 4, and
1. For the color of
5
2. For a few
Steps 1, 2, 3, 4,
and 5
3. For many
4. The paint
2
in
5. Leave the
2
in
A FAQ
the finish coat
(acrylic acid
paint), see the
delivered color
palette and
Pantone
number
specified on it.
smudges,
scratches, or
rust, manual
paint spraying
or brushing is
recommended.
scratches or
large-area
smudges and
rust, use a
painting gun to
spray paint.
coating should
be thin and
even. Paint
drops are
prohibited on
the coating.
The surface
should be
smooth.
repainted area
for about 30
minutes before
performing any
further
operation.
229
Advertisement
Table of Contents
