Table of Contents
Advertisement
JUPITER-(3000K, 6000K, 9000K)-H1 Smart
Transformer Station
User Manual
Figure 6-86 Removing the mixed-flow fan
Step 5 Reconnect the cables to the new mixed-flow fan based on the cable connection
records.
Step 6 Install the new mixed-flow fan in the original position. Use an M4 Phillips
screwdriver and tighten the screws to a torque of 1.2 N·m.
Step 7 Reinstall the sealing plate on cabinet C. Use an M6 Phillips screwdriver and
tighten the screws to a torque of 5 N·m.
----End
Power-On
Perform operations in the reverse order of the power-off operations.
Follow-up Procedure
Check the fan self-check status: After power-on, wait about 5 minutes, and choose
Monitoring > STS > Running Param. > O&M Parameters on the SmartLogger
WebUI to check that the fan self-check status is Normal.
Issue 02 (2023-09-30)
Copyright © Huawei Technologies Co., Ltd.
6 System Maintenance
216
Advertisement
Table of Contents
