Huawei JUPITER-3000K-H1 Smart User Manual page 238

JUPITER-(3000K, 6000K, 9000K)-H1 Smart
Transformer Station
User Manual
Procedure
Step 1 Gently polish the damaged areas using fine sandpaper to remove smudges or rust.
Figure A-5 Polishing a damaged area using sandpaper
Step 2 Dip a piece of cotton cloth into anhydrous alcohol and wipe the polished or
damaged area to remove the dirt and dust. Then wipe off the alcohol with a clean
and dry cotton cloth.
Figure A-6 Wiping a polished or damaged area using anhydrous alcohol
Step 3 Paint zinc-rich primer on the damaged coat using a brush or painting gun.
● If the base material is exposed in the area to be repaired, apply epoxy zinc-rich
primer, wait until the paint has dried, and then apply acrylic acid top coating.
● Select epoxy zinc-rich primer or acrylic acid top coating with a color the same
as the surface coating color of the equipment.
Step 4 Apply paint evenly to the damaged area based on the damage degree of the paint
using a spray bottle, brush, or painting gun until all damage traces are invisible.
Issue 02 (2023-09-30)
NO TICE
Copyright © Huawei Technologies Co., Ltd.
A FAQ
230