Zhone 100 User Manual page 99

980-001-0210G
June 1999
n Minute Interval History - Displays the number of valid intervals that have been ac-
cumulated since the last reset of the counters. ("n" value is Interval Period set on the
PVC Performance Configuration screen.) History statistics are total counts for each
performance parameter over all valid intervals up to 96 intervals.
Past Summary for DLCI [D=#orSum] - Determines what part of statistics history
will be used to produce the 10-second and History statistics displays. Choices
are:
Specific PVC - Enter DLCI number (#) or "Etc," for that PVC.
Sum of all PVCs - Enter Sum (or only "S").
Frame Relay traffic parameters displayed are the same as for Current Interval above.
10 Second: - Counts for each of the performance parameters for the selected PVC(s)
accumulated during the first 10-second period after entering this screen.
NOTE: This count will update every 10 seconds only if AutoUpdate [AU] is activated.
History: - Total counts for each of the performance parameters for the selected PVC(s)
over all valid intervals up to a maximum of 96 intervals. Does not include current in-
terval.
Additional Commands on this screen are:
Next Page [+] - Advances to the next page of summary statistics until all DLCIs (up
to 270) have been displayed.
NetPath 100 User's Manual - Installation Guide
5 Diagnostics
5-15