Zhone 100 User Manual page 147

Display
Drop Zero to Netw
2047 to Drop
Test Pkts to Netw
DSX Lp to Netw
V54 User Lp to Netw
V54 Drop Lp to Netw
LL Lp to User
LL Lp to Drop
980-001-0210G
June 1999
Table A-1 Active Test
All Zeros pattern BERT is being sent toward the Network Circuit (for DS0s assigned to
Drop Port.)
2047 pattern BERT is being sent toward the Drop Circuit.
Link Test Packets (40 -1590 octets) are being sent toward the Network Circuit (only on
the DS0s assigned to the User Port.)
Loopback is in place at the DSX Port (for DS0s assigned to DSX Port @ Nx64K)
toward the Network Circuit.
Loopback is in place at the User Port toward the Network Circuit, in response to a V.54
LoopUp code from the Network (only if DS0s are assigned to the User Port.)
Loopback is in place at the Drop Port toward the Network Circuit, in response to a V.54
LoopUp code from the Network (only if DS0s are assigned to the Drop Port.)
Loopback is in place at the User Port toward the User Circuit, in response to an LL
(Local Loopback) signal at the User Port interface (only if DS0s are assigned to the
User Port.)
Loopback is in place at the Drop Port toward the Drop Circuit, in response to an LL
(Local Loopback) signal at the Drop Port interface (only if DS0s are assigned to the
Drop Port.)
NetPath 100 User's Manual - Installation Guide
Description
Appendix
A-3