Alarms; Traps; Table 5-2 Traps - Private Mib Extension - Zhone 100 User Manual

Alarms

Traps

Component Object
T1 Facility Carrier Loss
(Red, Blue or Yellow)
Total Secs in error
(ES + UAS)
CSU CSU Fault
LMI LMI Netw Failure
LMI User Failure
Link Data Network Frame Errors
Secs
User Frame
Errors Secs
BECN/FECN
Secs (max PVC)
PVC Dropped Monitor
Packets
PVC Delay
msec (max PVC)
PVC Delivered Packets
(%) (
PVC Available
PVC Unavailable
DTE DTR Loss
DTE Power Loss
Power NetPath Power Loss
Modem Modem Failure
Dial Line Failure
Security Security Violation
(Login)
Authentication Failure
Aux Functions External Alarm
* Modem-Reported Traps are only issued on the occurrence of a primary facility failure and provided that the modem is not
already in use when the trap occurs.
980-001-0210G
June 1999
NetPath 100 generates "traps" (SNMP alarms or alerts) in response to certain detected
network conditions. The traps are reported either In-band utilizing the Management
PVC, or via Dial-Out utilizing the internal Modem. Alarm conditions are also dis-
played on NetPath 100 status screens and on front panel indicators.
The conditions (objects) which generate traps are included in the NetPath 100 Private
MIB Extension and are listed in Table 5-2.

Table 5-2 Traps - Private MIB Extension

Carrier status of T1 facility.
Errored seconds based on the current interval performance.
Unit subsystem failed self-test.
Errored LMI response per N392/393 counters on Network side.
Errored LMI enquiries per N392/393 counters on User side.
Errored seconds based on the current interval performance.
Errored seconds based on the current interval performance.
Highest BECN/FECN seconds of all PVCs based on the current
interval performance.
Highest Dropped packet count of all PVCs based on the current
interval performance.
Highest PVC round trip delay of all PVCs based on the current
interval performance.
Lowest percentage of Delivered packets of all PVCs based on
current interval perform.
PVC going from non-Active to Active as reported by frame switch.
PVC going from Active to non-Active as reported by frame switch.
Returns state of DTR lead.
Returns state of DTE Power indication.
State of AC power into unit. Reports on loss only. Sent to first trap
manager only.
Modem failed self-test which is initiated periodically.
Dial line failed self-test which is initiated periodically.
Identifies access point of failed login attempts
(3 consecutive): Console, Modem, Telnet, UDP, or SNMP.
Unauthorized SNMP Community Access detected (community not
configured for access).
Sensed contact closure.
NetPath 100 User's Manual - Installation Guide
Description
5 Diagnostics
Trap
Reported
In-Band/
Modem
Modem* &
In-Band
In-Band
Modem* &
In-Band
Modem* &
In-Band
In-Band
In-Band
In-Band
In-Band
In-Band
In-Band
In-Band
In-Band
In-Band
In-Band
In-Band
In-Band
In-Band
In-Band
In-Band
In-Band
In-Band
5-25