Table of Contents
Advertisement
5 Diagnostics
TxLoss & RxLoss
Modes
**************************** PVC Statistics Summary ****************************
Name: F243802
(P=Pkt,O=Oct,TC=TxCir,RC=RxCir,TL=TxLoss,RL=RxLoss,FD=FullDlay,orND=NetwDlay)
First DLCI[P=#]: 16
DLCI
25 Origin:
NNI-1:
33 Origin:
234 Origin:
341 Origin:
464 Origin:
531 Origin:
793 Origin:
795 Origin:
942 Origin:
Sum
-- 15 Min Interval History: 96 Valid -- Past Summary for DLCI [D=#orSum]:
NonDEPkts/--DEPkts--
LstP:
H:
ResetStats[RS]
Help[?]
>
Figure 5-12 PVC Statistics Summary Screen (TxLoss & RxLoss Mode)
5-18
TxLoss Mode screen display is shown in Figure 5-12.
Current Interval Count: 455 of 900 secs
NonDEPkts/-DEPkts-/Sta
0/
0/Rst
0/
0/
0/
0/Rst
0/
0/Rst
0/
0/Rst
0/
0/Rst
0/
0/Rst
0/
0/Rst
0/
0/Rst
0/
0/Rst
NNI-1
0/
0
0/
0
ViewHistory[VH current_time(optional)]
Close[X]
NextPage[+]
TxLoss Mode - Displays Loss measurement packet data for each PVC based on Loss
packets originating from this Netpath.
RxLoss Mode - Displays Loss measurement packet data for each PVC based on Loss
packets originating from a distant Netpath.
NonDEPkts/DEPkts - Counts of packets (with and without DE flags) which
have passed through the indicated segment.
Sta - Status for the indicated device. One of the following will appear:
(blank) - Indicates normal status.
Drpd - The number of Dropped Loss measurement Packets has exceeded the
threshold for this PVC. (TxLoss mode only.)
Rst - Resync was executed at some time during the interval.
Origin & Destin - The Origin counts and status from the device where the traffic
is entering the network. Destination values are derived from where the traffic
leaves the network.
NNI-1 - Values are from the first NNI encountered after the Origin.
NNI-2 - Values are from the second NNI encountered after the Origin.
% Dlvd - Percentage of sent packets delivered to the far end (NonDEPkts plus
DEPkts).
LstP - Counts (as above) for the Last Loss measurement packet received.
H - Counts (as above) for the accumulated history.
NOTE: Sending of Delay and Loss measurement packets is suspended for ALL PVCs
while a "Test Pkts to Netw" (operator initiated) test is performed on any PVC.
NetPath 100 User's Manual - Installation Guide
Mode[M=P,O,TC,RC,TL,RL,FD,orND]:TxLoss
NonDEPkts/-DEPkts-/Sta
Destin:
0/
NNI-2:
0/
Destin:
0/
Destin:
0/
Destin:
0/
Destin:
0/
Destin:
0/
Destin:
0/
Destin:
0/
Destin:
0/
NNI-2
NonDEPkts/--DEPkts--/Sta
0
0
0
0
AutoUpdate[AU]
%Dlvd
0/
100.000
0/
0/
100.000
0/
100.000
0/
100.000
0/
100.000
0/
100.000
0/
100.000
0/
100.000
0/
100.000
25 --
%Dlvd
0/
0/
100.000
0/
0/
100.000
980-001-0210G
June 1999
Advertisement
Table of Contents
Troubleshooting
